RISCO Group ACUS - Manual (Page 175)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 147
7 Configuring Door
Doors are created when the installer belonging to an installer company (which will install RAC
system in your organization) registers devices and creates sections using the ACIS application.
The basic door configurations are made by the Installer in ACIS. In ACUS, you configure door
settings in any particular section as per your requirement. You can only configure Door Settings;
it is not possible to delete doors from ACUS.
This chapter covers:
• 7.1 Search Doors
• 7.2 View Opened and Closed Doors in the Section
• 7.3 Door Actions
• 7.4 Edit Door Settings
• 7.5 Zone Configuration
• 7.6 Create Zone Set
• 7.7 Edit Sensor Configurations
• 7.8 Edit Relay Configurations
7.1 Search Doors
To search doors in the current section:
1. On the ACUS home page, click Settings
→ AC Elements → Doors. The Door
List screen appears.
Or
• On the ACUS home page, click Security → Doors. The Door List screen appears.