RISCO Group ACUS - Manual (Page 274)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 246
20. Select an icon which you want to assign for this event and click OK. The selected icon
is displayed in the Change Icon area.
Note: You may click Add New Image to add an image to the icon list. The Change Icon button is
enabled only if you select Create an Alarm check box.
In the Alarm Setting area, perform the following steps:
21. Select the schedule from the Schedule drop-down list.
22. In the Reactivation Delay field, enter the time required for reactivation delay and
select minutes or seconds from the drop-down list.
23. In the Bold field, select Yes option button to make the text in the row bold.
In the Execute Automation area, perform the following steps:
24. Select the Execute Automation check box to execute automation whenever this event
occurs. The Define Automation button is enabled.
25. Click Define Automation. The Define Automation dialog box appears.
Figure 253: Define Automation
26. Click + Add Automation. A new row is added in the dialog box.