RISCO Group ACUS - Manual (Page 446)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 418
Figure 443: Delete Event Filter
4. Click Yes. The alarm filter is deleted and the message appears, “Filter deleted
successfully”.
19.5 Zone Filter
Zone filters are used to restrict the uses from seeing unauthorized Zones. Zone filters returns
valid Zones only. You may add various criteria in the filter. The process to search a zone filter on
the Filter dialog box is same as searching a door filter. For details, refer to 19.1.2 Add Door
Filter .
19.5.1 Add Zone Filter
To add zone filter:
1. On the ACUS home page, click Settings
→ AC Elements → Filters. The Filter dialog
box appears.
Figure 444: Add Zone Filter
2. Click Add.
3. Select Zone Filter from the Filter On drop-down list.
4. Enter the name of the filter in the Name drop-down list.
5. Select the Private check box to mark this filter private. No other user apart from you
will be able to edit or delete this filter if it is marked private. Other users will be able to
view the filter only
The criteria area allows you to add more conditions to the filters. You can maximum12 criteria’s to
any filter. To add criteria’s to the filter: