RISCO Group ACUS - Manual (Page 311)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 283
Table 17: Door Modes
Field Name Description
Open Click Open to open the door.
Set Door Mode Point your cursor to the Set Door Mode
option and the following modes are displayed:
• Normal
Operation: Click Normal
Operation to put the door back into
normal operation.
• Inhibit Free Access: Click Inhibit Free
Access to prohibit free access (without a
card/PIN, or any other identification).
• Put in Free Access: Click Put in Free
Access to allow free access to the door.
• Door Free Access Confirmation: Using
this, you may put the door in Free Access
Mode after confirming the identity of the
first person accessing the door. This
means that the moment you enable this
option, the first person accessing the
door needs to swipe the ID card on this
door to get access. After this, the door
will be put in free access mode and
anyone can access the door without any
identification required.
• Unlock: Click Unlock to unlock the door.
Set Door State Point the cursor to the Set Door State option
and the following door states are displayed:
• Enable
Door: Click this option to enable
the door.
• Disable Door: Click this option to disable
the door. After the door is disabled,
person will not get access to this door.
Reset Alarm Point the cursor to the Reset Alarm option
and the following actions are displayed:
• Reset
Forced Door: Click Reset Forced
Door to reset the status back to Normal.
• Reset Door Open Too Long: Click to
Reset Door Open Too Long to reset the
status back to Normal.
Edit Door Click to Edit Door edit the door
configurations. The Edit Door dialog box
appears. For details on how to edit the door,
refer to section
7.4 Edit Door Settings .