RISCO Group ACUS - Manual (Page 365)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 337
ID You can manually enter the ID for the visitor or click Generate ID.
When you click Generate ID, the system generates the ID that is reflected in
the field.
Note: Visitors can either be assigned a card or a PIN Code as configured in
General Configuration.
When you select any Read/Write card type from the Type list, the Generate ID
is enabled. Click to Generate ID generate the identification number for the card
automatically.
Layout Select the layout of the card from the Layout drop-down list.
Status Select the status of the card from the Status drop-down list.
PIN Code If you select the PIN Code check box, then the visitor needs to enter a numeric
PIN Code to get access to any door.
Note: Visitors can either be assigned a card or a PIN Code as configured in
General Configuration.
Include
Biometric Data Select this check box to enable the biometric data of the visitor.
This check box is enabled if the Enable Biometric Feature check box is
selected in the Visitor Layout screen. For details, refer to
15.7 Configure
Visitor Layout .
12. Click Save to Card List to save the card details. The card details appear in the list
under the Add button.
• Click Save on Card to save the details on the card.
• Click Save. The card details are saved.
• Click Print Card to print the card.
13. In the More Authorizations area, select the PIN Only Access check box to enable
PIN Code access to the visitor.
14. Select the Submitted to Antipassback check box to enable anti-pass-back for the
visitor’s card.
15. Click Save. The message appears, “Visitor created successfully”.
After you save the visitor, the Rules, Authorized Doors and Visits tabs are enabled. To view the
data in the Rules and Authorized Doors tabs, you need to plan and start a visit for this visitor.
16. Click the Visits tab. You can add visits directly from here.