RISCO Group ACUS - Manual (Page 72)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 44
Figure 39: Change the Crisis Level
The current crisis level is displayed in the Select new Crisis Level drop-down list. In the above
screen shot, you come to know that the current Crisis Level for all doors is Crisis Level 1.
Note: You can assign different crisis levels for different doors. Select Crisis Level - 2 from the
drop-down list to see the doors where Crisis Level 2 is applied.
3. Select the crisis level from the Select new Crisis Level drop-down list. For example,
select Crisis Level 1. The crisis levels for this section are defined in general
configurations. For details, refer to
13.1 Manage Crisis Level .
4. In the Doors tab, click All Doors to mark all doors in this section in crisis level 1 state.
To mark specific doors, click the Search Doors option button and enter the search
criteria in the adjacent field and click (Search). The list of doors appears in the
grid below.
5. Select the check boxes against the doors which you want to include in crisis level 1
state and click to move them to the adjacent selection area.