PLANET XGS3-24040 User Manual
Page 124
Advertising
XGS3 Command Guide
5-124
Parameters:
<WORD> the name identification of the group, no longer than 32 characters; no parameter means to display the
configuration of all port isolation groups.
Command Mode:
Admin Mode and Global Mode.
Default:
Display the configuration of all port isolation groups.
Usage Guide:
Users can view the configuration of port isolation with this command.
Example:
Display the port isolation configuration of the port isolation group named as “test”.
Switch(config)#show isolate-port group test
Isolate-port group test
The isolate-port Ethernet1/5
The isolate-port Ethernet1/2
Advertising