PLANET XGS3-24040 - Manual (Page 87)

XGS3 Command Guide
1-87
Command:
show tftp
Function:
Display the parameter settings for the TFTP server.
Default:
No display by default.
Command mode:
Admin and Configuration Mode.
Example:
Switch#show tftp
timeout : 60
Retry Times : 10
Displayed information
Explanation
Timeout
Timeout time.
Retry Times
Retransmission times.
1.5.9 tftp-server enable
Command:
tftp-server enable
no tftp-server enable
Function:
Start TFTP server, the “no ftp-server enable” command shuts down TFTP server and prevents TFTP user from
logging in.
Default:
TFTP server is not started by default.
Command mode:
Global Mode
Usage Guide:
When TFTP server function is enabled, the switch can still perform tftp client functions. TFTP server is not started by
default.
Example:
Enable TFTP server service.
Switch#config
Switch(config)#tftp-server enable
Relative Command: