PLANET XGS3-24040 - Manual (Page 490)

33-203
33.64 timers spf
Command:
timers spf <spf-delay> <spf-holdtime>
no timers spf
Function:
Adjust the value of the route calculating timer. The “no timers spf” command restores relevant
values to default.
Parameter:
<spf-delay> 5 seconds by default.
<spf-holdtime> 10 seconds by default.
Command Mode:
OSPF protocol mode.
Usage Guide:
This command configures the delay time between receiving topology change and SPF calculation,
further configured the hold item between two discontinuous SPF calculation.
Example:
Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#timers spf 5 10