PLANET XGS3-24040 - Manual (Page 335)

25-48
Switch(dhcp-1-config)#dns-server 2001:da8::1
25.8 domain-name
Command:
domain-name <domain-name>
no domain-name <domain-name>
Function:
To configure domain name of DHCPv6 client; the no form of this command will delete the domain
name.
Parameter:
<domain-name> is the domain name, less than 32 characters.
Command Mode:
DHCPv6 Address Pool Configuration Mode.
Default:
The domain name parameter of address pool is not configured by default.
Usage Guide:
At most 3 domain names can be configured for each address pool.
Example:
To set the domain name of DHCPv6 client as test.com.cn
Switch(dhcp-1-config)#domain-name test.com.cn
25.9 excluded-address
Command:
excluded-address <ipv6-address>
no excluded-address <ipv6-address>
Function:
To configure the specified IPv6 address to be excluded from the address pool, the excluded
address will not be allocated to any hosts; the no form of this command will remove the
configuration.
Parameter:
<ipv6-address> is the IPv6 address to be excluded from being allocated to hosts in the address
pool.
Default:
Disabled
Command Mode:
DHCPv6 address pool configuration mode.
Usage Guide:
This command is used to preserve the specified address from DHCPv6 address allocation.
Example:
To configure to exclude 2001:da8:123::1 from DHCPv6 address allocation.