PLANET XGS3-24040 - Manual (Page 495)

34-208
34.7 debug ipv6 ospf events
Command:
[no] debug ipv6 ospf events [abr|asbr|os|router|vlink]
Function:
Open debugging switches showing OSPF events. The “no debug ipv6 ospf events
[abr|asbr|os|router|vlink]” command closes this debugging switch.
Default:
Closed.
Command Mode:
Admin mode
Example:
Switch#debug ipv6 ospf events
1970/01/01 01:10:35 IMI: ROUTER[Process:(null)]: GC timer expire
34.8 debug ipv6 ospf ifsm
Command:
[no] debug ipv6 ospf ifsm [status|events|timers]
Function:
Open debugging switches showing the OSPF interface states; the “[no] debug ospf ifsm
[status|events|timers]” command closes this debugging switches.
Default:
Closed.
Command Mode:
Admin mode
Example:
Switch#debug ipv6 ospf ifsm
1970/01/01 01:11:44 IMI: IFSM[Vlan1]: Hello timer expire
1970/01/01 01:11:44 IMI: IFSM[Vlan2]: Hello timer expire
34.9 debug ipv6 ospf lsa
Command:
[no]debug ipv6 ospf lsa [generate|flooding|install|maxage|refresh]
Function:
Open debugging switches showing showing link state announcements; the “no debug ospf lsa
[generate|flooding|install|maxage|refresh]” closes the debugging switches.
Default:
Closed.
Command Mode:
Admin mode