PLANET XGS3-24040 - Manual (Page 344)

25-57
Command Mode: G
lobal Mode.
Usage Guide:
The DHCPv6 services include DHCPv6 server function, DHCPv6 relay function, DHCPv6 prefix
delegation function. All of the above services are configured on ports. Only when DHCPv6 server
function is enabled, the IP address assignment of DHCPv6 client, DHCPv6 relay and DHCPv6
prefix delegation functions enabled can be configured on ports.
Examp:
To enable DHCPv6 server.
Switch(config)#service dhcpv6
25.23 show ipv6 dhcp
Command:
show ipv6 dhcp
Function:
To show the enable switch and DUID of DHCPv6 service.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the enable switch and DUID of DHCPv6 service, this command only can support the DUID
type of DUID-LLT. The DUID types are the same not only displayed but also required in client and
server identifier options.
Example:
Switch#show ipv6 dhcp
DHCPv6 is enabled
DUID is <000100060000000500030f112233>
25.24 show ipv6 dhcp binding
Command:
show ipv6 dhcp binding [<ipv6-address>| pd <ipv6-prefix|prefix-length>|count]
Function:
To show all the address and prefix binding information of DHCPv6.
Parameter:
<ipv6-address> is the specified IPv6 address; count show the number of DHCPv6 address
bindings.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show all the address and prefix binding information of DHCPv6, include type, DUID, IAID, prefix,
valid time and so on.