PLANET XGS3-24040 - Manual (Page 254)

17-12
Default:
None.
Usage Guide:
IPv6 address prefix can not be multicast address or any other specific IPv6 address, and different
layer 3 interfaces can not configure the same address prefix. For global unicast address, the prefix
must be in the range from 2000:: to 3fff::, and the length of the prefix must be greater than or equal
to 3. For site-local address and link-local address, the length of the prefix must be greater than or
equal to 3. For interface loopback port, the length of the prefix must be equaled to 128.
Example:
Configure an IPv6 address on VLAN1 Layer 3 interface: the prefix is 2001:3f:ed8::99 and the length
of the prefix is 64.
Switch(Config-if-Vlan1)#ipv6 address 2001:3f:ed8::99/64
17.2.11 ipv6 route
Command:
ipv6 route <ipv6-prefix | prefix-length> {<ipv6address> | <interface-type interface-number> |
{<ipv6address> <interface-type interface-number>} | tunnel <tunnel no> } [<precedence>]
no ipv6 route <ipv6-prefix | prefix-length> {<ipv6address> | <interface-type
interface-number> | {<ipv6address> <interface-type interface-number>} | tunnel <tunnel no> }
[<precedence>]