PLANET XGS3-24040 - Manual (Page 457)

33-170
Default:
Rfc 2328 compatible by default.
Command Mode:
OSPF protocol mode
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#compatible rfc1583
33.10 clear ip ospf process
Command:
clear ip ospf [<process-id>] process
Function:
Use this command to clear and restart OSPF routing processes. One certain OSPF process will be
cleared by specifying the process ID, or else all OSPF processes will be cleared.
Default:
No default configuration.
Command Mode:
Admin mode
Example:
Switch#clear ip ospf process
33.11 debug ospf events
Command:
debug ospf events [abr|asbr|lsa|nssa|os|router|vlink]
no debug ospf events [abr|asbr|lsa|nssa|os|router|vlink]
Function:
Open debugging switches showing various OSPF events messages; the “no debug ospf events
[abr|asbr|lsa|nssa|os|router|vlink]” command closes the debugging switch.
Default:
Closed
Command Mode:
Admin and global mode
Example:
Switch#debug ospf events router