PLANET XGS3-24040 - Manual (Page 634)

XGS3 Command Guide
38-63
Detect the neighbor’s interface
Uptime/Expires
The neighbor uptime/expire time
Maj Ver
Major version
Min Ver
Mini version
Cap Flg
Capacity flag
38.7.11 show ip dvmrp prune
Command: show ip dvmrp prune [{group <A.B.C.D> [detail]}|{source <A.B.C.D/M> group
<A.B.C.D> [detail]}|{source <A.B.C.D/M> [detail] }|detail]
Function: Display DVMRP message forwarding item.
Parameter: None
Default: Do not display
Command Mode: Any Configuration Mode
Usage Guide: This command applies to display DVMRP multicast forwarding item, namely multicast
forwarding table calculated by dvmrp protocol.
Example:
Switch#show ip dvmrp prune
Flags: P=Pruned,H=Host,D=Holddown,N=NegMFC,I=Init
Source Mask Group State FCR Exptime Prune/Graft
Address Len Address Cnt ReXmit-Time
13.1.1.0 24 239.0.0.1 ..... 1 01:59:56 Off
Displayed Information
Explanations
Source Address
Source address
Mask Len
Mask length
Group Address