PLANET XGS3-24040 - Manual (Page 572)

XGS3 Command Guide
38-1
Chapter 38 IPv4 Multicast Protocol
38.1 Public Commands for Multicast
38.1.1 show ip mroute
Command: show ip mroute [<GroupAddr> [<SourceAddr>]]
Function: show IPv4 software multicast route table.
Parameter: GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Default: None
Command Mode: Admin mode and global mode
Usage Guide:
Example: show all entries of multicast route table.
Switch(config)#show ip mroute
Name: Loopback, Index: 2002, State:49
Name: null0, Index: 2003, State:49
Name: sit0, Index: 2004, State:80
Name: Vlan1, Index: 2005, State:1043
Name: Vlan2, Index: 2006, State:1002
Name: pimreg, Index: 2007, State:c1
The total matched ipmr active mfc entries is 1, unresolved ipmr entries is 0
Group Origin Iif Wrong Oif:TTL
225.1.1.1 192.168.1.136 vlan1 0 2006:1
Displayed information
Explanation
Name
the name of interface
Index
the index number of interface
State
the state of interface
The total matched ipmr active mfc entries
The total matched active IP multicast route mfc
（multicast forwarding cache） entries
unresolved ipmr entries
unresolved ip multicast route entries