PLANET XGS3-24040 - Manual (Page 869)

64-3
Function: Turn on the on-off of showing the information of the CPU receiving or sending packets, the “no
debug driver {receive | send}” command turn off the on-off.
Parameter: receive | send show the information of receiving or sending packets;
interface {<interface-list>| all}: interface-list is the Ethernet port number, all indicate all the Ethernet
ports.
protocol {<protocol-type> | discard | all}: protocol-type is the type of the protocol of the packet,
including snmp、telnet、http、dhcp、igmp、hsrp、arp、bgp、rip、ospf、pim、ssh、vrrp、ripng、ospfv3、
pimv6、icmpv6、bgp4plus、unknown-mcast、unknown-mcast6、ttl0-2cpu、isis、dot1x、gvrp、stp、lacp、
cluster、mld、vrrpv3、ra、uldp、lldp、eapou, all means all of the protocol types, discard means all the
discarded packets.
Detail show detail information.
Command Mode: Admin Mode
Usage Guide: This command is used to debug, it is supposed to be used with the help of the technical
support.
Example: Turn on the on-off for showing the receiving packets.
Switch#debug driver receive