PLANET XGS3-24040 - Manual (Page 560)

35-273
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 0.0.0.0 32768 700 800 i
*> 172.0.0.0/8 0.0.0.0 32768 700 800 i
Related Command: ip community-list
35.95 show ip bgp dampening
Command: show ip bgp [<ADDRESS-FAMILY>] dampening
{<dampened-paths>|<flap-statistics>|<parameters>}
Function: Display the routes permitted by BGP and relevant to the route dampening.
Parameter: <ADDRESS-FAMILY>: Address-family, such as “ipv4 unicast”.
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Only the surged routes will be displayed. The Parameters shows the display configuration
other than specific routes. The other two options will respectively show the restrained route and the
dampening (recently recovered from invalid) routing messages.
Example:
Switch#sh ip bgp dampening dampened-paths
BGP table version is 12, local router ID is 10.1.1.66
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
*d 100.1.3.0/24 10.1.1.64 00:27:40 100 ?
Total number of prefixes 1
Switch#sh ip bgp dampening flap-statistics
BGP table version is 13, local router ID is 10.1.1.66
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
*d 100.1.3.0/24 10.1.1.64 3 00:06:05 00:27:00 100 ?
Switch#sh ip bgp dampening parameters