PLANET XGS3-24040 - Manual (Page 850)

61-4
61.9 show dns client
Command: show dns client
Function: Display the DNS Client information maintained by the switch.
Parameter: None.
Command Mode: Admin and Configuration Mode.
Example:
Switch(config)#show dns client
DNS REQUEST LIST:
Total number of dns request is 2
Address Request Id
192.168.11.141 1
192.168.11.138 2
61.10 ip domain-lookup
Command: ip domain-lookup
no ip domain-lookup
Function: To enable/disable DNS function, whether the switch will send dynamic DNS domain queries to
the real DNS server or not.
Parameter: None.
Command Mode: Global Mode.
Default: Disabled.
Usage Guide: This command is used to enable or disable the switch DNS dynamic query function. If
DNS dynamic query function is enabled, the DNS server will resolve the host name and domain name to
the IPv4 or IPv6 address for requests from the clients. If DNS is disabled, client applications will not be
able to send any DNS requests to the DNS server. In this situation, only the static address resolution is
available. For the address mapping in the resolve cache, which is learnt through DNS before, will be
invalid after aging.
Example: To enable DNS function, can resolve the domain name dynamic.
Switch(config)# ip domain-lookup
61.11 ip domain-list
Command: ip domain-list <WORD>
no ip domain-list <WORD>
Function: To configure/delete domain name suffix.
Parameter: <WORD> is the character string of domain name suffix, less than 63 characters.
Command Mode: Global Mode.
Default: Disabled.
Usage Guide: This command is used to configure or delete suffix of domain name, when the entered
domain name is not integrity (such as sina), the switch can add suffix automatically, after that, address
mapping can run, the domain name suffix can be configured no more than 6. The first configured domain
name suffix will be added first.