PLANET XGS3-24040 - Manual (Page 796)

49-2
Ethernet1/1
IPv6 Security RA State: Yes
Ethernet1/3
IPv6 Security RA State: Yes
49.4 debug ipv6 security-ra
Command: debug ipv6 security-ra
no debug ipv6 security-ra
Function: Enable the debug information of IPv6 security RA; the no operation of this command will
disable the debug information of IPv6 security RA.
Command Mode: Admin Mode.
Parameters: None.
Usage Guide: Users can check the proceeds of message handling of IPv6 security RA, which will help
investigate the causes to problems if there is any.
Example: Enable the debug information of IPv6 security RA.
Switch#debug ipv security-ra