PLANET XGS3-24040 - Manual (Page 845)

60-6
60.16 debug ntp sync
Command: debug ntp sync
no debug ntp sync
Function: To enable/disable debug switch of displaying local time synchronization information.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: None.
Example: To enable debug switch of displaying local time synchronization information.
Switch# debug ntp sync
60.17 debug ntp events
Command: debug ntp events
no debug ntp events
Function: To enable/disable debug switch of displaying NTP event.
Parameter: None.
Default: Disable the debug switch of displaying NTP event.
Command Mode: Admin Mode.
Usage Guide: To enable debug switch of displaying NTP event, after that, if some server changed from
available to unavailable or from unavailable to available, the received illegal packet events will be printed.
Example: To enable debug switch of displaying NTP event information.
Switch# debug ntp events
60.18 show ntp status
Command: show ntp status
Function: To display time synchronization status, include synchronized or not, layers, address of time
source and so on.
Parameter: None.
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: None.
Example:
Switch# show ntp status
Clock status: synchronized
Clock stratum: 3
Reference clock server: 1.1.1.2
Clock offset: 0.010 s
Root delay: 0.012 ms
Root dispersion: 0.000 ms
Reference time: TUE JAN 03 01:27:24 2006