PLANET XGS3-24040 - Manual (Page 563)

35-276
For address family: IPv4 Unicast
BGP table version 2, neighbor version 2
Index 1, Offset 0, Mask 0x2
Community attribute sent to this neighbor (both)
0 accepted prefixes
1 announced prefixes
Connections established 7; dropped 6
35.99 show ip bgp paths
Command: show ip bgp [<ADDRESS-FAMILY>] paths
Function: Display the path message permitted by BGP.
Parameter: <ADDRESS-FAMILY>: Address-family such as “ipv4 unicast”.
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Display the BGP path message includes the utilization state.
Example:
Switch#sh ip bgp paths
Address Refcnt Path
[0x331dad0:0] (1)
[0x331d850:93] (1) 600
[0x331d8d8:249] (2) 200 300
35.100 show ip bgp prefix-list
Command: show ip bgp [<ADDRESS-FAMILY>] prefix-list [<NAME>]
Function: For displaying the route meet the specific prefix-list in BGP.
Parameter: <ADDRESS-FAMILY>: Address family such as “ipv4 unicast”
<NAME>: Name of prefix-list
Default: None
Command Mode: Admin and configuration mode
Usage Guide: We can select the required BGP route by regular expression.
Example:
Switch(config)#ip prefix-list PL permit any
Switch(config)#
Switch#sh ip bgp prefix-list PL
BGP table version is 1, local router ID is 10.1.1.64
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete