PLANET XGS3-24040 - Manual (Page 198)

13-64
13.1.8 spanning-tree hello-time
Command:
spanning-tree hello-time <time>
no spanning-tree hello-time
Function:
Set switch Hello time; The command “no spanning-tree hello-time” restores the default setting.
Parameter:
<time> is Hello time in seconds. The valid range is from 1 to 10.
Command mode:
Global Mode
Default:
Hello Time is 2 seconds by default.
Usage Guide:
Hello time is the interval that the switch sends BPDUs. Hello time is co working with forward delay
and max age. The parameters should meet the following conditions. Otherwise, the MSTP may
work incorrectly.
2 * (Bridge_Forward_Delay - 1.0 seconds) >= Bridge_Max_Age
Bridge_Max_Age >= 2 * (Bridge_Hello_Time + 1.0 seconds)
Example:
Set MSTP hello time to 5 seconds in global mode.
Switch(config)#spanning-tree hello-time 5
13.1.9 spanning-tree link-type p2p
Command:
spanning-tree link-type p2p {auto | force-true | force-false}
no spanning-tree link-type
Function:
Set the link type of the current port; the command “no spanning-tree link-type” restores link type
to auto-negotiation.
Parameter:
auto sets auto-negotiation, force-true forces the link as point-to-point type, force-false forces the
link as non point-to-point type.
Command mode:
Port Mode
Default:
The link type is auto by default, The MSTP detects the link type automatically.
Usage Guide:
When the port is full-duplex, MSTP sets the port link type as point-to-point; When the port is
half-duplex, MSTP sets the port link type as shared.