PLANET XGS3-24040 - Manual (Page 585)

XGS3 Command Guide
38-14
38.3.5 debug pim nexthop
Command: debug pim nexthop
no debug pim nexthop
Function: Enable or Disable pim nexthop debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect PIM NEXTHOP changing information by the pim nexthop switch.
Example:
Switch# debug ip pim nexthop
38.3.6 debug pim nsm
Command: debug pim nsm
no debug pim nsm
Function: Enable or Disable pim debug switch communicating with Network Services
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect the communicating information between PIM and Network Services by this switch.
Example:
Switch# debug ip pim nsm
38.3.7 debug pim packet
Command: debug pim packet
debug pim packet in
debug pim packet out
no debug pim packet
no debug pim packet in
no debug pim packet out
Function: Enable or Disable pim debug switch
Parameter: in display only received pim packets
out display only transmitted pim packets
none display both
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect the received and transmitted pim packets by this switch.
Example:
Switch# debug ip pim packet in