PLANET XGS3-24040 - Manual (Page 160)

11-26
Example:
Associate Isolated VLAN200 and Community VLAN300 to Primary VLAN100.
Switch(Config-Vlan100)#private-vlan association 200;300
11.1.12 show dot1q-tunnel
Command:
show dot1q-tunnel
Function:
Display the information of all the ports at dot1q-tunnel state.
Parameter:
None.
Command Mode:
Admin Mode and other configuration Mode.
Usage Guide:
This command is used for displaying the information of the ports at dot1q-tunnel state.
Example:
Display current dot1q-tunnel state.
Switch#show dot1q-tunnel
Interface Ethernet1/1:
dot1q-tunnel is enable
I nterface Ethernet1/3:
dot1q-tunnel is enable
11.1.13 show garp
Command:
show garp [<interface-name>]
Function:
Display the global and port information for GARP.
Parameter:
<interface-name> stands for the name of the Trunk port to be displayed.
Command mode:
Admin Mode and other configuration Mode.
Usage Guide:
N/A.
Example:
Display global GARP information.
Switch #show garp
11.1.14 show gvrp