PLANET XGS3-24040 - Manual (Page 846)

60-7
60.19 show ntp session
Command: show ntp session [<ip-address> | <ipv6-address>]
Function: To display the information of all NTP session or some one specific session, include server ID,
server layer, and the local offset according to server. (The symbol * means this server is the selected
local time source)
Parameter: ip-address: The IPv4 address of some specifics configured time server.
ipv6-address: The IPv6 address of some specifics configured time server.
If no parameter, the session relative information of all servers will be displayed (Include
broadcast and multicast servers)
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: None.
Example:
Switch# show ntp session
server stream type rootdelay rootdispersion trustlevel
* 1.1.1.2 2 unicast 0.010s 0.002s 10
2.2.2.2 3 unicast 0.005s 0.000s 10