PLANET XGS3-24040 - Manual (Page 56)

XGS3 Command Guide
1-56
Console login method, user1 and user2 can only login the switch in normal user mode through the telnet and console
login method. For HTTP login method, only the admin user can pass the authentication configuration, user1 and
user2 will be denied.
Switch(config)#username admin privilege 15 password 0 admin
Switch(config)# username user1 privilege 1 password 7 user1
Switch(config)# username user2 password 0 user2
Switch(config)# authentication line console login local
1.1.32 web language
Command:
web language {chinese | english}
Function:
Set the language for displaying the HTTP Server information.
Parameter:
chinese for Chinese display; english for English display.
Command mode:
Admin Mode
Default:
The default setting is English display.
Usage Guide:
The user can select the language according to their preference.
1.1.33 write
Command:
write
Function:
Save the currently configured parameters to the Flash memory.
Command mode:
Admin Mode.
Usage Guide:
After a set of configuration with desired functions, the setting should be saved to the Flash memory, so that the
system can revert to the saved configuration automatically in the case of accidentally powered off or power failure.
This is the equivalent to the copy running-config startup-config command.
1.2 Commands for Telnet
1.2.1 authentication ip access-class
Command:
authentication ip access-class {<num-std>|<name>}
no authentication ip access-class
Function: