PLANET XGS3-24040 - Manual (Page 421)

31-134
31.24 key-string
Command:
key-string <text>
no key-string <text>
Function:
Configure a password corresponding to a key. The “no key-string <text>“command delete the
corresponding password.
Parameter:
<text> is a character string without length limit. However when referred by RIP authentication only
the first 16 characters will be used.
Command Mode:
Keychain-key mode
Usage Guide:
This command is for configure different passwords for keys with different ID.
Example:
Switch# config terminal
Switch(config)# key chain mychain
Switch(config-keychain)# key 1
Switch(config-keychain-key)# key-string prime
Related Command:
key, key chain, accept-lifetime, send-lifetime
31.25 maximum-prefix
Command:
maximum-prefix <maximum-prefix> [<threshold>]
no maximum-prefix
Function:
Configure the maximum number of RIP routes in the route table. The “no maximum-prefix”
command cancels the limit.
Parameter:
<maximum-prefix> the maximum number of RIP route, ranging between 1-65535; a warning is
given when the number rate of current route exceeds <threshold> ranging between 1-100, default
at 75.
Command Mode:
router mode
Usage Guide:
The maximum RIP route only limits the number of routes learnt through RIP but not includes direct
route or the RIP static route configured by the route command. The base on which the comparison