PLANET XGS3-24040 - Manual (Page 543)

35-256
35.62 neighbor peer-group (Creating)
Command: neighbor < TAG> peer-group
no neighbor < TAG> peer-group
Function: Create/delete a peer group. The “no neighbor < TAG> peer-group” command deletes a peer
group.
Parameter: <TAG>: Name of the peer group of which the largest length contains 256 characters.
Default: No peer group.
Command Mode: BGP route mode and address-family mode
Usage Guide: By configuring the peer group, a group of peers with the same attributes will be configured
at the same time so to reduce the configuration staff labor. Assign members to the peer group with
neighbor <ip-address> peer-group <TAG> command.
Example:
Switch(config-router)#neighbor pg peer-group
Switch(config-router)#neighbor 10.1.1.64 peer-group pg
Switch(config-router)#neighbor pg remote-as 100
Related Command: neighbor peer-group (Configuring group members)
35.63 neighbor peer-group (Configuring group
members)
Command: neighbor <ip-address> peer-group <TAG>
no neighbor <ip-address> peer-group <TAG>
Function: Assign/delete peers in the group. The “no neighbor <ip-address> peer-group
<TAG>“command deletes the peers from the peer group.
Parameter: <ip-address>: Neighbor IP address.
<TAG>: Name of peer group.
Default: No peer group.
Command Mode: BGP route mode and address-family mode
Usage Guide: By configuring the peer group, a group of peers with the same attributes will be configured
at the same time so to reduce the configuration staff labor. Create peer group with above command and
assign members into the group with this command.
Example: Refer to above examples.
Related Command: neighbor peer-group (Creating)
35.64 neighbor port
Command: neighbor <ip-address> port <0-65535>
no neighbor <ip-address> port [<0-65535>]
Function: Specify the TCP port number of the partner through which the communication carries. The “no
neighbor <ip-address> port [<0-65535>]” command restores the port number to default value.