PLANET XGS3-24040 - Manual (Page 461)

33-174
Switch# debug ospf redistribute route receive
33.20 default-information originate
Command:
default-information originate [always | METRIC | METRICTYPE | ROUTEMAP]
no default-information originate
Function:
This command create a default external route to OSPF route area; the “no default-information
originate” closes this feature.
Parameter:
always: Whether default route exist in the software or not, the default route is always advertised.
METRIC = metric <value>: Set the metric value for creating default route, <value> ranges
between 0~16777214, default metric value is 0.
METRICTYPE = metric-type {1|2} set the OSPF external link type of default route.
1 Set the OSPF external type 1 metric value.
2 Set the OSPF external type 2 metric value.
ROUTEMAP = route-map <WORD>.
<WORD> specifies the route map name to be applied.
Default:
Default metric value is 10, default OSPF external link type is 2.
Command Mode:
OSPF protocol mode
Usage Guide:
When introducing route into OSPF route area with this command, the system will behaves like an
ASBR.
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#default-information originate always metric 23 metric-type 2 route-map
myinfo
Relevant Commands:
route-map
33.21 default-metric
Command:
default-metric <value>
no default-metric