PLANET XGS3-24040 - Manual (Page 275)

17-33
no tunnel source {<ipaddress>|<interface-name>}
Function:
Configure tunnel source.
Parameter:
<ipv4-daddress> is the ipv4 address of tunnel source.
Command Mode:
Tunnel Configuration Mode.
Default Situation:
None.
Usage Guide:
None.
Example:
Configure tunnel source IPv4 address 202.89.176.6.
Switch(Config-if-Tunnel1)#tunnel source 202.89.176.6
17.2.39 tunnel destination
Command: .
tunnel destination <ipaddress>
no tunnel destination <ipaddress>
Function:
Configure tunnel destination.
Parameter:
<ipv4-daddress> is the ipv4 address of tunnel destination.
Command Mode:
Tunnel Configuration Mode.
Default Situation:
None.