PLANET XGS3-24040 - Manual (Page 181)

11-47
Usage Guide:
After adding the IP subnet to specified VLAN, the IP-subnet-based VLAN function will be globally
enabled. This command can disable the IP-subnet-based VLAN function on specified port to meet
special user applications.
Example:
Disable the IP-subnet-based VLAN function on port1.
Switch#config
Switch(config)#interface ethernet 1/1
Switch(Config-If-Ethernet1/1)#no switchport subnet-vlan enable
11.3 Commands for Voice VLAN Configuration
11.3.1 show voice-vlan
Command:
show voice-vlan
Function:
Display the configuration status of the Voice VLAN on the switch.
Parameter:
None.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display Voice VLAN Configuration.
Example:
Display the Current Voice VLAN Configuration.
Switch#show voice-vlan
Voice VLAN ID:2
Ports:ethernet1/1;ethernet1/3
Voice name MAC-Address Mask Priority
------------ ----- ---------------------- ----- --------
financePhone 00-e0-4c-77-ab-9d 0xff 5
manager 00-0a-eb-26-8d-f3 0xfe 6
Mr_Lee 00-30-4f-11-22-33 0x80 5
NULL 00-30-4f-11-22-33 0x0 5