PLANET XGS3-24040 - Manual (Page 821)

56-2
Example: Enable debug information of MRPP protocol.
Switch#debug mrpp
56.4 enable
Command: enable
no enable
Function: Enable configured MRPP ring, the “no enable” command disables this enabled MRPP ring.
Parameter:
Command Mode: MRPP ring mode
Default: Default disable MRPP ring.
Usage Guide: Executing this command, it must enable MRPP protocol, and if other commands have
configured, the MRPP ring is enabled.
Example: Configure MRPP ring 4000 of switch to primary node, and enable the MRPP ring.
Switch(config)#mrpp enable
Switch(config)#mrpp ring 4000
Switch(mrpp-ring-4000)#control-vlan 4000
Switch(mrpp-ring-4000)# node-mode master
Switch(mrpp-ring-4000)#fail-timer 18
Switch(mrpp-ring-4000)#hello-timer 6
Switch(mrpp-ring-4000)#enable
Switch(mrpp-ring-4000)#exit
Switch(config)#in ethernet 1/1
Switch(config-If-Ethernet1/1)#mrpp ring 4000 primary-port
Switch(config)#in ethernet 1/3
Switch(config-If-Ethernet1/3)#mrpp ring 4000 secondary-port