PLANET XGS3-24040 - Manual (Page 749)

Commands for Security Function Chapter 2 Commands for 802.1x
41-21
Tying situation on port Ethernet1/1
the ingress acl use in firewall is 111.
No. 111 numeric expansion ACL tied to entrance of port Ethernet1/2
interface VLAN 100
Tying situation on VLAN 100
packet(s) number is 10
Number of packets matching this ACL rule
41.27 show firewall
Command: show firewall
Functions: Reveal configuration information of packet filtering functions.
Parameters: None.
Default: None.
Command Mode: Admin and Configuration Mode.
Examples:
Switch#show firewall
Firewall status: Enable.
Firewall default rule: Permit
Displayed information
Explanation
fire wall is enable
Packet filtering function enabled
the default action of firewall is permit
Default packet filtering function is permit
41.28 show ipv6 access-lists
Command: show ipv6 access-lists [<num>|<acl-name>]
Function: Show the configured IPv6 access control list.
Parameter:<num> is the number of specific access control list, the valid range is 500～699,amongst
500 ～ 599 is digit standard IPv6 ACL number,600 ～ 699 is the digit extended IPv6 ACL
number;<acl-name> is the nomenclature character string of a specific access control list, lengthening
within 1～16.