PLANET XGS3-24040 - Manual (Page 261)

17-19
Switch#(Config-if-Vlan1)#ipv6 nd ra-mtu 500
17.2.22 ipv6 nd reachable-time
Command:
ipv6 nd reachable-time <seconds>
Function:
Set the reachable-time of sending router advertisement.
Parameters:
<value> is the reachable-time of sending router advertisement, ranging from 0 to 3600000
milliseconds.
Command Mode：
Interface Configuration Mode.
Default Settings:
The default reachable-time of sending router advertisement is 30000 milliseconds.
Example:
Set the reachable-time of sending router advertisement in interface vlan 1 as 100000 milliseconds.
Switch#(Config-if-Vlan1)#ipv6 nd reachable-time 100000
17.2.23 ipv6 nd retrans-timer
Command:
ipv6 nd retrans-timer <seconds>
Function:
Set the retrans-timer of sending router advertisement.
Parameters:
<value> is the retrans-timer of sending router advertisement, ranging from 0 to 4294967295
milliseconds.
Command Mode:
Interface Configuration Mode.
Default:
The default retrans-timer of sending router advertisement is 1000 milliseconds.
Example:
Set the reachable-time of sending router advertisement in interface vlan 1 as 10000 milliseconds.
Switch#(Config-if-Vlan1)#ipv6 nd retrans-timer 10000
17.2.24 ipv6 nd other-config-flag
Command:
ipv6 nd other-config-flag
Function:
Set the flag representing whether information other than the address information will be obtained via
DHCPv6.