PLANET XGS3-24040 - Manual (Page 669)

XGS3 Command Guide
39-1
Chapter 39 IPv6 Multicast Protocol
39.1 Public Commands for Multicast
39.1.1 show ipv6 mroute
Command: show ipv6 mroute [<GroupAddr> [<SourceAddr>]]
Function: show IPv6 software multicast route table.
Parameter: GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Default: None
Command Mode: Admin mode and global mode
Usage Guide: None.
Example: show all entries of IPv6 multicast route table
Switch(config)# show ipv6 mroute
Name: Loopback, Index: 2002, State:49
Name: Vlan1, Index: 2006, State:1043
Name: Vlan11, Index: 2007, State:1043
Name: Vlan12, Index: 2008, State:1043
Name: Tunnel1, Index: 2009, State:d1
Name: Tunnel2, Index: 0, State:0
Name: pim6reg, Index: 2010, State:c1
Name: pimreg, Index: 2011, State:c1
The total matched ip6mr active mfc entries is 1, unresolved ip6mr entries is 1
Group Origin Iif Wrong Oif:TTL
ff2f::1 2014:1:2:3::2 Tunnel1 0 2008:1
ff3f::1 2012:1:2:3::2 NULL 4 0:0
Displayed information
Explanation
Name
the name of interface
Index
the index number of interface
State
the state of interface
The total matched ipmr active mfc entries
The total matched active IP multicast route mfc
（multicast forwarding cache） entries