PLANET XGS3-24040 - Manual (Page 581)

XGS3 Command Guide
38-10
Interface located in RPF neighbor
Upstream State
Upstream direction, including
FORWARDING(forwarding upstream data),
PRUNED(Upstream stops forwarding data),
ACKPENDING(waiting for upstream response,
forwarding upstream data)
Origin State
The two states: ORIGINATOR(on transmit
state-refresh state), NON_ORIGINATOR(on
non_transmit state-refresh state)
Local
Local position joins interface, the interface
receives IGMP Join
Pruned
PIM prunes interface, the interface receives Prune
messages
Asserted
Asserted state
Outgoing
Multicast data finally exported from interface is
index number, index is 2 in this case. It can check
interface information in detail by commanding
show ip pim interface
38.2.16 show ip pim neighbor
Command: show ip pim neighbor
Function: Display router neighbors
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display multicast router neighbors maintained by the PIM
Example:
Switch (config)#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode