PLANET XGS3-24040 - Manual (Page 172)

11-38
11.1.28 vlan ingress enable
Command:
vlan ingress enable
no vlan ingress enable
Function:
Enable the VLAN ingress rule for a port; the “no vlan ingress enable” command disables the
ingress rule.
Command mode:
Port Mode.
Default:
VLAN ingress rules are enabled by default.
Usage Guide:
When VLAN ingress rules are enabled on the port, when the system receives data it will check
source port first, and forwards the data to the destination port if it is a VLAN member port.
Example:
Disable VLAN ingress rules on the port.
Switch(Config-If-Ethernet1/1)# no vlan ingress enable