PLANET XGS3-24040 - Manual (Page 486)

33-199
Default:
None.
Command Mode:
Admin Mode and Configuration Mode.
Usage Guide:
None.
Example:
Switch#show ip ospf redistribute
ospf process 1 redistribute information：
ospf process 2
ospf process 3
bgp
ospf process 2 redistribute information：
ospf process 1
bgp
ospf process 3 redistribute information：
ospf process 1
bgp
Switch#show ip ospf 2 redistribute
ospf process 2 redistribute information：
ospf process 1
bgp
33.59 show ip ospf route
Command:
show ip ospf [<process-id>] route
Function:
Display the OSPF routing table messages.
Parameter: .
<process-id> is the process ID ranging between 0~65535
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf route
O 10.1.1.0/24 [10] is directly connected, Vlan1, Area 0.0.0.0
O 10.1.1.4/32 [10] via 10.1.1.4, Vlan1, Area 0.0.0.0
IA 11.1.1.0/24 [20] via 10.1.1.1, Vlan1, Area 0.0.0.0