PLANET XGS3-24040 - Manual (Page 579)

XGS3 Command Guide
38-8
Function: Display PIM interface information
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display PIM interface information
Example:
Switch(config)#show ip pim interface
Address Interface VIFindex Ver/ Nbr DR DR
Mode Count Prior
10.1.4.3 Vlan1 0 v2/S 1 1 10.1.4.3
10.1.7.1 Vlan2 2 v2/S 0 1 10.1.7.1
Displayed Information
Explanations
Address
Interface address
Interface
Interface name
VIF index
Interface index
Ver/Mode
Pim version and mode,usually v2,sparse mode
displays S,dense mode displays D
Nbr Count
The interface’s neighbor count
DR Prior
Dr priority
DR
The interface’s DR address
38.2.15 show ip pim mroute dense-mode
Command: show ip pim mroute dense-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function: Display PIM-DM message forwarding items.
Parameter: group <A.B.C.D>: displays forwarding items relevant to this multicast address.
source <A.B.C.D>: displays forwarding items relevant to this source.