PLANET XGS3-24040 - Manual (Page 232)

14-98
Parameters:
<interface-id> is the port ID; buffers is the queue buffer setting on the port; policy is the policy
setting on the port; queuing is the queue setting for the port; statistics is the number of packets
allowed to pass for in-profile and out-of-profile traffic according to the policy bound to the port.
Default:
N/A.
Command mode:
Admin Mode.
Usage Guide:
In single rate single bucket mode, the messages can only red or green when passing police. In the
print information, in-profile means green and out-profile means red. In dual bucket mode, there are
three colors of messages. But the counter can only count two kinds of messages, the red and
yellow ones will both be treated as out-profile. Only when configuring ingress policies, there is
statistic information.
Example:
Switch #show mls qos interface ethernet 1/2
Ethernet 1/2
default cos:0
DSCP Mutation Map: Default DSCP Mutation Map
Attached policy map for Ingress: p1
Displayed information
Explanation
Ethernet1/2
Port name
default cos:0
Default CoS value of the port.
DSCP Mutation Map: Default DSCP Mutation Map
Port DSCP map name
Attached policy map for Ingress: p1
Policy name bound to port.
Switch # show mls qos interface buffers ethernet 1/2
Ethernet 1/2
packet number of 8 queue:
0x200 0x200 0x200 0x200 0x200 0x200 0x200