PLANET XGS3-24040 - Manual (Page 322)

24-35
Set the max number of Ping request (Echo Request) message to be sent in Ping-detection of
conflict on DHCP server, whose default value is 2; the no operation of this command will restore the
default value.
Parameters:
<request-num> is the number of Ping request message to be sent in Ping-detection of conflict.
Default Settings:
No more than 2 Ping request messages will be sent by default.
Command Mode:
Global Configuration Mode.
Examples:
Set the max number of Ping request (Echo Request) message to be sent in Ping-detection of
conflict on DHCP server as 3.
Switch(config)#ip dhcp ping packets 3
Related Command:
ip dhcp conflict ping-detection enable, ip dhcp ping timeout
24.1.18 ip dhcp ping timeout
Command:
ip dhcp ping timeout <timeout-value>
no ip dhcp ping timeout
Function:
Set the timeout period (in ms) of waiting for a reply message (Echo Request) after each Ping
request message (Echo Request) in Ping-detection of conflict on DHCP server, whose default value
is 500ms. The no operation of this command will restore the default value.
Parameters:
<timeout-value> is the timeout period of waiting for a reply message after each Ping request
message in Ping-detection of conflict.
Default Settings:
The timeout period is 500ms by default.
Command Mode:
Global Configuration Mode.
Examples:
Set the timeout period (in ms) of waiting for each reply message (Echo Request) in Ping-detection
of conflict on DHCP server as 600ms.
Switch(config)#ip dhcp conflict timeout 600
Related Command:
ip dhcp conflict ping-detection enable, ip dhcp ping packets
24.1.19 lease
Command:
lease { [<days>] [<hours>][<minutes>] | infinite }