8 show arp traffic – PLANET XGS3-24040 User Manual
Page 287
Advertising
17-45
Layer 3 interface corresponding to the ARP entry.
Port
Physical (Layer2) port corresponding to the ARP entry.
Flag
Describes whether ARP entry is dynamic or static.
17.5.8 show arp traffic
Command:
show arp traffic
Function:
Display the statistic information of ARP messages of the switch. For box switches, this command
will only show statistics of APP messages received and sent from the current boardcard.
Command mode:
Admin and Config Mode
Usage Guide:
Display statistics information of received and sent APP messages.
Example:
Switch#show arp traffic
ARP statistics:
Rcvd: 10 request, 5 response
Sent: 5 request, 10 response
Advertising