PLANET XGS3-24040 - Manual (Page 49)

XGS3 Command Guide
1-49
delete the mapping.
Parameter:
<hostname> is the host name, up to 15 characters are allowed; <ip_addr> is the corresponding IP address for the
host name, takes a dot decimal format; all is all of the host name.
Command mode:
Global Mode
Usage Guide:
Set the association between host and IP address, which can be used in commands like “ping <host>“.
Example:
Set IP address of a host with the hostname of “beijing” to 200.121.1.1.
Switch(config)#ip host beijing 200.121.1.1
Command related:
telnet, ping, traceroute
1.1.15 ipv6 host
Command:
ipv6 host <hostname> <ipv6_addr>
no ipv6 host {<hostname>|all}
Function:
Configure the mapping relationship between the IPv6 address and the host; the “no ipv6 host <hostname>”
command deletes this mapping relationship.
Parameter:
<hostname> is the name of the host, containing max 15 characters;<ipv6_addr> is the IPv6 address corresponding
to the host name.<all> is all the host address.
Command Mode:
Global Mode
Usage Guide:
Configure a fixed corresponding relationship between the host and the IPv6 address, applicable in commands such
as “traceroute6 <host>”, etc.
Example:
Set the IPv6 address of the host named beijing to 2001:1:2:3::1
Switch(config)#ipv6 host beijing 2001:1:2:3::1
Command related:
ping6,traceroute6
1.1.16 ip http server
Command:
ip http server
no ip http server
Function:
Enable Web configuration; the “no ip http server” command disables Web configuration
Command mode:
Global mode