PLANET XGS3-24040 - Manual (Page 420)

31-133
Parameter:
<keyid> is key ID, ranging between 0-2147483647.
Command Mode:
Keychain mode and keychain-key mode
Usage Guide:
The command permits entering the keychain-key mode and set the passwords corresponding to the
keys.
Example:
Switch# config terminal
Switch(config)# key chain mychain
Switch(config-keychain)# key 1
Switch(config-keychain-key)#
Relevant Commands:
key chain, key-string, accept-lifetime, send-lifetime
31.23 key chain
Command:
key chain <name-of-chain>
no key chain < name-of-chain >
Function:
This command is for entering a keychain manage mode and configure a keychain. The “no key
chain < name-of-chain >“deletes one keychain.
Parameter:
<name-of-chain> is the name string of the keychain the length of which is not specifically limited.
Command Mode:
Global Mode
Example:
Switch# config terminal
Switch(config)# key chain mychain
Switch(config-keychain)#
Relevant Commands:
key, key-string, accept-lifetime, send-lifetime