PLANET XGS3-24040 - Manual (Page 409)

31-122
rip only delete RIP routes from the RIP route table
ospf only delete OSPF routes from the RIP route table
isis only delete ISIS routes from the RIP route table
bgp only delete BGP routes from the RIP route table
all delete all routes from the RIP route table
Default:
No default configurations.
Command Mode:
Admin mode
Usage Guide:
Use this command with the all parameter will delete all learnt route in the RIP route which will be
immediately recovered except for rip route. The dynamic learnt RIP route can only be recovered by
studying one more time.
Example:
Switch# clear ip rip route 10.0.0.0/8
Switch# clear ip rip route ospf
31.4 debug rip
Command:
debug rip [events| nsm| packet[recv|send][detail]| all]
no debug rip [events| nsm| packet[recv|send][detail]| all]
Function:
Open various RIP adjustment switches and show various adjustment debugging messages. The
“no debug rip [events| nsm| packet[recv|send][detail]| all]” command close corresponding
debugging switch.
Parameter:
events shows the debugging messages of RIP events
nsm shows the communication messages between RIP and NSM
packet shows the debugging messages of RIP data packets
recv shows the messages of the received data packets
send shows the messages of the sent data packets
detail shows the messages of received or sent data packets
Default: Debug switch closed.
Command Mode:
Admin mode and global mode
Example:
Switch# debug rip packet
Switch#1970/01/01 01:01:43 IMI: SEND[Vlan1]: Send to 224.0.0.9:520
1970/01/01 01:01:43 IMI: SEND[Vlan1]: Send to 224.0.0.9:520
1970/01/01 01:01:47 IMI: RECV[Vlan1]: Receive from 20.1.1.2:520