PLANET XGS3-24040 - Manual (Page 511)

34-224
Switch#show ipv6 ospf abc redistribute
ospf process abc redistribute information：
ospf process def
bgp
34.36 show ipv6 ospf topology
Command: show ipv6 ospf [<tag>] topology [area <area-id>]
Function: Show messages of OSPF topology.
Parameter: <tag> is the processes tag, which is a character string.
<area-id> is an area ID which could be shown in digits ranging between 0～4294967295, or an IPv4
address.
Default: Not displayed.
Command Mode: All modes
Example:
Switch#show ipv6 ospf topology
OSPFv3 Process (*null*)
OSPFv3 paths to Area (0.0.0.0) routers
Router ID Bits Metric Next-Hop Interface
192.168.2.1 10 192.168.2.1 Vlan2
192.168.2.2 --
192.168.2.3 10 192.168.2.3 Vlan1
34.37 show ipv6 ospf virtual-links
Command: show ipv6 ospf [<tag>] virtual-links
Function: Show OSPF virtual link messages.
Parameter: <tag> is the processes tag, which is a character string.
Default: Not displayed.
Command Mode: All modes
Example:
Switch#show ipv6 ospf virtual-links
Virtual Link VLINK1 to router 5.6.7.8 is up
Transit area 0.0.0.1 via interface Vlan1, instance ID 0
Local address 3ffe:1234:1::1/128
Remote address 3ffe:5678:3::1/128
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Adjacency state Up