PLANET XGS3-24040 - Manual (Page 314)

24-27
will be reallocated.
Example:
Removing all IP-hardware address binding records.
Switch#clear ip dhcp binding all
Related Command:
show ip dhcp binding
24.1.3 clear ip dhcp conflict
Command:
clear ip dhcp conflict {<address> | all }
Function:
Deletes an address present in the address conflict log.
Parameters:
<address> is the IP address that has a conflict record;
all stands for all addresses that have conflict records.
Command mode:
Admin Mode.
Usage Guide:
“show ip dhcp conflict” command can be used to check which IP addresses are conflicting for use.
The “clear ip dhcp conflict” command can be used to delete the conflict record for an address. If
"all” is specified, then all conflict records in the log will be removed. When records are removed from
the log, the addresses are available for allocation by the DHCP server.
Example:
The network administrator finds 10.1.128.160 that has a conflict record in the log and is no longer
used by anyone, so he deletes the record from the address conflict log.
Switch#clear ip dhcp conflict 10.1.128.160
Related Command:
ip dhcp conflict logging, show ip dhcp conflict
24.1.4 clear ip dhcp server statistics
Command:
clear ip dhcp server statistics
Function:
Deletes the statistics for DHCP server, clears the DHCP server count.
Parameters:
None
Command mode:
Admin Mode.
Usage Guide:
DHCP count statistics can be viewed with “show ip dhcp server statistics” command, all