PLANET XGS3-24040 - Manual (Page 703)

XGS3 Command Guide
39-35
39.4.7 show ipv6 pim anycast-rp first-hop
Command: show ipv6 pim anycast-rp first-hop
Command Mode: Admin and Configuration Mode.
Usage Guide: Display the state information of ANYCAST RP, and display the mrt node information
generated in the first hop RP which is currently maintained by the protocol.
Example:
Switch(config)#show ipv6 pim anycast-rp first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1
(E,G) Entries: 0
INCLUDE (2000:1:111::2, ffle::1)
Local .l..............................
Display
Explanation
Entries
The number of all kinds of entries.
INCLUDE
The mrt information created in the first hop RP.
39.4.8 show ipv6 pim anycast-rp non-first-hop
Command: show ipv6 pim anycast-rp non-first-hop
Command Mode: Admin and Configuration Mode.
Usage Guide: Display the state information of ANYCAST RP, and display the mrt node information
generated in the non first hop RP which is currently maintained by the protocol, that is the mrt node
information which is created after the first hop RP transfers the register message it received to this RP.
Example:
Switch(config)#show ip pim anycast-rp non-first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1
(E,G) Entries: 0