Document Outline

• Chapter 1 Commands for Basic Switch Configuration
  • 1.1 Commands for Basic Configuration
    • 1.1.1 Authentication line
    • 1.1.2 boot img
    • 1.1.3 boot startup-config
    • 1.1.4 clock set
    • 1.1.5 config
    • 1.1.6 debug ssh-server
    • 1.1.7 enable
    • 1.1.8 enable password
    • 1.1.9 end
    • 1.1.10 exec-timeout
    • 1.1.11 exit
    • 1.1.12 help
    • 1.1.13 hostname
    • 1.1.14 ip host
    • 1.1.15 ipv6 host
    • 1.1.16 ip http server
    • 1.1.17 language
    • 1.1.18 login
    • 1.1.19 password
    • 1.1.20 reload
    • 1.1.21 service password-encryption
    • 1.1.22 service terminal-length
    • 1.1.23 sysContact
    • 1.1.24 sysLocation
    • 1.1.25 set default
    • 1.1.26 setup
    • 1.1.27 show clock
    • 1.1.28 show temperature
    • 1.1.29 show tech-support
    • 1.1.30 show version
    • 1.1.31 username
    • 1.1.32 web language
    • 1.1.33 write
  • 1.2 Commands for Telnet
    • 1.2.1 authentication ip access-class
    • 1.2.2 authentication ipv6 access-class
    • 1.2.3 authentication line login
    • 1.2.4 authentication securityip
    • 1.2.5 authentication securityipv6
    • 1.2.6 terminal length
    • 1.2.7 terminal monitor
    • 1.2.8 telnet
    • 1.2.9 telnet server enable
    • 1.2.10 telnet-server max-connection
    • 1.2.11 ssh-server authentication-retries
    • 1.2.12 ssh-server enable
    • 1.2.13 ssh-server host-key create rsa
    • 1.2.14 ssh-server max-connection
    • 1.2.15 ssh-server timeout
    • 1.2.16 ssh-user
    • 1.2.17 show ssh-server
    • 1.2.18 show ssh-user
    • 1.2.19 show telnet login
  • 1.3 Commands for Configuring Switch IP
    • 1.3.1 interface vlan
    • 1.3.2 interface ethernet 0
    • 1.3.3 ip address
    • 1.3.4 ipv6 address
    • 1.3.5 ip bootp-client enable
    • 1.3.6 ip dhcp-client enable
  • 1.4 Commands for SNMP
    • 1.4.1 debug snmp mib
    • 1.4.2 debug snmp kernel
    • 1.4.3 rmon enable
    • 1.4.4 show snmp
    • 1.4.5 show snmp engineid
    • 1.4.6 show snmp group
    • 1.4.7 show snmp mib
    • 1.4.8 show snmp status
    • 1.4.9 show snmp user
    • 1.4.10 show snmp view
    • 1.4.11 snmp-server community
    • 1.4.12 snmp-server enable
    • 1.4.13 snmp-server enable traps
    • 1.4.14 snmp-server engineid
    • 1.4.15 snmp-server group
    • 1.4.16 snmp-server host
    • 1.4.17 snmp-server securityip
    • 1.4.18 snmp-server securityip
    • 1.4.19 snmp-server view
    • 1.4.20 snmp-server user
  • 1.5 Commands for Switch Upgrade
    • 1.5.1 copy（FTP）
    • 1.5.2 copy（TFTP）
    • 1.5.3 ftp-dir
    • 1.5.4 ftp-server enable
    • 1.5.5 ftp-server timeout
    • 1.5.6 ip ftp
    • 1.5.7 show ftp
    • 1.5.8 show tftp
    • 1.5.9 tftp-server enable
    • 1.5.10 tftp-server retransmission-number
    • 1.5.11 tftp-server transmission-timeout
• Chapter 2 File System Commands
  • 2.1 cd
  • 2.2 copy
  • 2.3 delete
  • 2.4 dir
  • 2.5 format
  • 2.6 mkdir
  • 2.7 mount
  • 2.8 pwd
  • 2.9 rename
  • 2.10 rmdir
  • 2.11 unmount
• Chapter 3 Commands for Cluster
  • 3.1 clear cluster nodes
  • 3.2 cluster auto-add
  • 3.3 cluster commander
  • 3.4 cluster ip-pool
  • 3.5 cluster keepalive interval
  • 3.6 cluster keepalive loss-count
  • 3.7 cluster member
  • 3.8 cluster member auto-to-user
  • 3.9 cluster reset member
  • 3.10 cluster run
  • 3.11 cluster update member
  • 3.12 debug cluster
  • 3.13 debug cluster packets
  • 3.14 show cluster
  • 3.15 show cluster members
  • 3.16 show cluster candidates
  • 3.17 show cluster topology
  • 3.18 rcommand commander
  • 3.19 rcommand member
• Chapter 4 Commands for Network Port Configuration
  • 4.1 Commands for Ethernet Port Configuration
    • 4.1.1 bandwidth
    • 4.1.2 combo-forced-mode
    • 4.1.3 clear counters interface
    • 4.1.4 flow control
    • 4.1.5 interface ethernet
    • 4.1.6 loopback
    • 4.1.7 mdi
    • 4.1.8 name
    • 4.1.9 negotiation
    • 4.1.10 rate-suppression
    • 4.1.11 rate-violation
    • 4.1.12 show interface
    • 4.1.13 shutdown
    • 4.1.14 speed-duplex
• Chapter 5 Commands for Port Isolation Function
  • 5.1 isolate-port group
  • 5.2 isolate-port group switchport interface
  • 5.3 isolate-port apply
  • 5.4 show isolate-port group
• Chapter 6 Commands for Port Loopback Detection Function
  • 6.1 loopback-detection control
  • 6.2 loopback-detection specified-vlan
  • 6.3 loopback-detection interval-time
  • 6.4 loopback-detection control-recovery timeout
  • 6.5 show loopback-detection
  • 6.6 debug loopback-detection
• Chapter 7 Commands for ULDP
  • 7.1 uldp enable
  • 7.2 uldp disable
  • 7.3 uldp hello-interval
  • 7.4 uldp aggressive-mode
  • 7.5 uldp manual-shutdown
  • 7.6 uldp reset
  • 7.7 uldp recovery-time
  • 7.8 show uldp
  • 7.9 debug uldp fsm interface ethernet
  • 7.10 debug uldp error
  • 7.11 debug uldp event
  • 7.12 debug uldp packet
  • 7.13 debug uldp interface ethernet
• Chapter 8 Commands for LLDP Function
  • 8.1 lldp enable
  • 8.2 lldp enable (Port)
  • 8.3 lldp mode
  • 8.4 lldp tx-interval
  • 8.5 lldp msgTxHold
  • 8.6 lldp transmit delay
  • 8.7 lldp notification interval
  • 8.8 lldp trap
  • 8.9 lldp transmit optional tlv
  • 8.10 lldp neighbors max-num
  • 8.11 lldp tooManyNeighbors
  • 8.12 show lldp
  • 8.13 show lldp traffic
  • 8.14 show lldp interface ethernet
  • 8.15 show lldp neighbors interface ethernet
  • 8.16 show debugging lldp
  • 8.17 debug lldp
  • 8.18 debug lldp packets
  • 8.19 clear lldp remote-table
• Chapter 9 Commands for Port Channel
  • 9.1 debug port-channel
  • 9.2 interface port-channel
  • 9.3 lacp port-priority
  • 9.4 lacp system-priority
  • 9.5 load-balance
  • 9.6 port-group
  • 9.7 port-group mode
  • 9.8 show port-group
• Chapter 10 Commands for Jumbo
  • 10.1 jumbo enable
• Chapter 11 VLAN Configuration
  • 11.1 Commands for VLAN Configuration
    • 11.1.1 debug gvrp
    • 11.1.2 dot1q-tunnel enable
    • 11.1.3 dot1q-tunnel tpid
    • 11.1.4 gvrp
    • 11.1.5 garp timer hold
    • 11.1.6 garp timer join
    • 11.1.7 garp timer leave
    • 11.1.8 garp timer leaveall
    • 11.1.9 name
    • 11.1.10 private-vlan
    • 11.1.11 private-vlan association
    • 11.1.12 show dot1q-tunnel
    • 11.1.13 show garp
    • 11.1.14 show gvrp
    • 11.1.15 show vlan
    • 11.1.16 show vlan-translation
    • 11.1.17 switchport access vlan
    • 11.1.18 switchport hybrid allowed vlan
    • 11.1.19 switchport hybrid native vlan
    • 11.1.20 switchport interface
    • 11.1.21 switchport mode
    • 11.1.22 switchport trunk allowed vlan
    • 11.1.23 switchport trunk native vlan
    • 11.1.24 vlan
    • 11.1.25 vlan-translation
    • 11.1.26 vlan-translation enable
    • 11.1.27 vlan-translation miss drop
    • 11.1.28 vlan ingress enable
  • 11.2 Commands for Dynamic VLAN Configuration
    • 11.2.1 dynamic-vlan mac-vlan prefer
    • 11.2.2 dynamic-vlan subnet-vlan prefer
    • 11.2.3 mac-vlan
    • 11.2.4 mac-vlan vlan
    • 11.2.5 protocol-vlan
    • 11.2.6 show dynamic-vlan prefer
    • 11.2.7 show mac-vlan
    • 11.2.8 show mac-vlan interface
    • 11.2.9 show protocol-vlan
    • 11.2.10 show subnet-vlan
    • 11.2.11 show subnet-vlan interface
    • 11.2.12 subnet-vlan
    • 11.2.13 switchport mac-vlan enable
    • 11.2.14 switchport subnet-vlan enable
  • 11.3 Commands for Voice VLAN Configuration
    • 11.3.1 show voice-vlan
    • 11.3.2 switchport voice-vlan enable
    • 11.3.3 voice-vlan
    • 11.3.4 voice-vlan vlan
• Chapter 12 Commands for MAC Address Table Configuration
  • 12.1 Commands for MAC Address Table Configuration
    • 12.1.1 mac-address-table aging-time
    • 12.1.2 mac-address-table static|blackhole
    • 12.1.3 show mac-address-table
  • 12.2 Commands for Mac Address Binding configuration
    • 12.2.1 clear port-security dynamic
    • 12.2.2 show port-security
    • 12.2.3 show port-security address
    • 12.2.4 show port-security interface
    • 12.2.5 switchport port-security
    • 12.2.6 switchport port-security convert
    • 12.2.7 switchport port-security lock
    • 12.2.8 switchport port-security mac-address
    • 12.2.9 switchport port-security maximum
    • 12.2.10 switchport port-security timeout
    • 12.2.11 switchport port-security violation
• Chapter 13 ommands for MSTP
  • 13.1 Commands for MSTP
    • 13.1.1 abort
    • 13.1.2 exit
    • 13.1.3 instance vlan
    • 13.1.4 name
    • 13.1.5 revision-level
    • 13.1.6 spanning-tree
    • 13.1.7 spanning-tree forward-time
    • 13.1.8 spanning-tree hello-time
    • 13.1.9 spanning-tree link-type p2p
    • 13.1.10 spanning-tree maxage
    • 13.1.11 spanning-tree max-hop
    • 13.1.12 spanning-tree mcheck
    • 13.1.13 spanning-tree mode
    • 13.1.14 spanning-tree mst configuration
    • 13.1.15 spanning-tree mst cost
    • 13.1.16 spanning-tree mst port-priority
    • 13.1.17 spanning-tree mst priority
    • 13.1.18 spanning-tree mst rootguard
    • 13.1.19 spanning-tree portfast
    • 13.1.20 spanning-tree priority
    • 13.1.21 spanning-tree format
    • 13.1.22 spanning-tree digest-snooping
    • 13.1.23 spanning-tree tcflush (Global mode)
    • 13.1.24 spanning-tree tcflush (Port mode)
  • 13.2 Commands for Monitor and Debug
    • 13.2.1 show spanning-tree
    • 13.2.2 show spanning-tree mst config
    • 13.2.3 show mst-pending
    • 13.2.4 debug spanning-tree
• Chapter 14 Commands for QoS and PBR
  • 14.1 class
  • 14.2 class-map
  • 14.3 match
  • 14.4 mls qos
  • 14.5 mls qos cos
  • 14.6 mls qos aggregate-policy
  • 14.7 mls qos trust
    • 14.7.1 mls qos dscp-mutation
    • 14.7.2 mls qos map
    • 14.7.3 policy
    • 14.7.4 policy aggregate
    • 14.7.5 policy-map
  • 14.8 priority-queue out
  • 14.9 queue bandwidth
  • 14.10 set
  • 14.11 service-policy
  • 14.12 show class-map
  • 14.13 show policy-map
  • 14.14 show mls qos aggregate-policy
  • 14.15 show mls qos interface
  • 14.16 show mls qos maps
  • 14.17 show mls-qos
  • 14.18 wrr-queue bandwidth
  • 14.19 wrr-queue cos-map
• Chapter 15 Commands for IPv6 PBR
  • 15.1 class
  • 15.2 class-map
  • 15.3 mls qos
  • 15.4 match ipv6 access-group
  • 15.5 policy-map
  • 15.6 set
  • 15.7 service-policy
• Chapter 16 Commands for Flow-based Redirection
  • 16.1 access-group redirect to interface ethernet
  • 16.2 show flow-based-redirect
• Chapter 17 Commands for Layer 3 Forwarding
  • 17.1 Commands for Layer 3 Interface
    • 17.1.1 bandwidth
    • 17.1.2 shutdown
    • 17.1.3 interface vlan
    • 17.1.4 interface loopback
  • 17.2 Commands for IPv4/v6 configuration
    • 17.2.1 clear ipv6 neighbor
    • 17.2.2 debug ip packet
    • 17.2.3 debug ipv6 packet
    • 17.2.4 debug ipv6 icmp
    • 17.2.5 debug ipv6 nd
    • 17.2.6 debug ipv6 tunnel packet
    • 17.2.7 ipv6 enable
    • 17.2.8 ipv6 proxy enable
    • 17.2.9 ip address
    • 17.2.10 ipv6 address
    • 17.2.11 ipv6 route
    • 17.2.12 ipv6 redirect
    • 17.2.13 ipv6 nd dad attempts
    • 17.2.14 ipv6 nd ns-interval
    • 17.2.15 ipv6 nd suppress-ra
    • 17.2.16 ipv6 nd ra-lifetime
    • 17.2.17 ipv6 nd min-ra-interval
    • 17.2.18 ipv6 nd max-ra-interval
    • 17.2.19 ipv6 nd prefix
    • 17.2.20 ipv6 nd ra-hoplimit
    • 17.2.21 ipv6 nd ra-mtu
    • 17.2.22 ipv6 nd reachable-time
    • 17.2.23 ipv6 nd retrans-timer
    • 17.2.24 ipv6 nd other-config-flag
    • 17.2.25 ipv6 nd managed-config-flag
    • 17.2.26 ipv6 neighbor
    • 17.2.27 ipv6 rthdr-type0 enable
    • 17.2.28 interface tunnel
    • 17.2.29 show ip traffic
    • 17.2.30 show ipv6 interface
    • 17.2.31 show ipv6 route
    • 17.2.32 show ipv6 neighbors
    • 17.2.33 show ipv6 traffic
    • 17.2.34 show ipv6 enable
    • 17.2.35 show ipv6 redirect
    • 17.2.36 show ipv6 tunnel
    • 17.2.37 description
    • 17.2.38 tunnel source
    • 17.2.39 tunnel destination
    • 17.2.40 tunnel nexthop
    • 17.2.41 tunnel 6to4-relay
    • 17.2.42 tunnel mode
  • 17.3 Commands for IP Route Aggregation
    • 17.3.1 ip fib optimize
  • 17.4 Commands for URPF
    • 17.4.1 debug l4driver urpf
    • 17.4.2 ip urpf enable
    • 17.4.3 show urpf rule ipv4 num
    • 17.4.4 show urpf rule ipv6 num
    • 17.4.5 show urpf rule ipv4
    • 17.4.6 show urpf rule ipv6
    • 17.4.7 show urpf
    • 17.4.8 urpf enable
  • 17.5 Commands for ARP Configuration
    • 17.5.1 arp
    • 17.5.2 clear arp-cache
    • 17.5.3 clear arp traffic
    • 17.5.4 debug arp
    • 17.5.5 ip proxy-arp
    • 17.5.6 l3 hashselect
    • 17.5.7 show arp
    • 17.5.8 show arp traffic
• Chapter 18 Commands for ARP Scanning Prevention
  • 18.1 anti-arpscan enable
  • 18.2 anti-arpscan port-based threshold
  • 18.3 anti-arpscan ip-based threshold
  • 18.4 anti-arpscan trust
  • 18.5 anti-arpscan trust ip
  • 18.6 anti-arpscan recovery enable
  • 18.7 anti-arpscan recovery time
  • 18.8 anti-arpscan log enable
  • 18.9 anti-arpscan trap enable
  • 18.10 show anti-arpscan
  • 18.11 debug anti-arpscan
• Chapter 19 Commands for Preventing ARP, ND Spoofing
  • 19.1 ip arp-security updateprotect
  • 19.2 ipv6 nd-security updateprotect
  • 19.3 ip arp-security learnprotect
  • 19.4 ipv6 nd-security learnprotect
  • 19.5 ip arp-security convert
  • 19.6 ipv6 nd-security convert
  • 19.7 clear ip arp dynamic
  • 19.8 clear ipv6 nd dynamic
• Chapter 20 Command for ARP GUARD
  • 20.1 arp-guard ip
• Chapter 21 Command for ARP Local Proxy
  • 21.1 ip local proxy-arp
• Chapter 22 Commands for Gratuitous ARP Configuration
  • 22.1 ip gratuitous-arp
  • 22.2 show ip gratuitous-arp
• Chapter 23 Commands for ND Snooping
  • 23.1 clear ipv6 nd snooping binding
  • 23.2 debug ipv6 nd snooping
  • 23.3 ipv6 nd snooping enable (Global mode)
  • 23.4 ipv6 nd snooping mac-binding-limit
  • 23.5 ipv6 nd snooping max-dad-delay
  • 23.6 ipv6 nd snooping max-dad-prepare-delay
  • 23.7 ipv6 nd snooping max-sac-lifetime
  • 23.8 ipv6 nd snooping policy
  • 23.9 ipv6 nd snooping port-binding-limit
  • 23.10 ipv6 nd snooping static-binding
  • 23.11 ipv6 nd snooping trust
  • 23.12 ipv6 nd snooping user-control
  • 23.13 show ipv6 nd snooping
  • 23.14 show ipv6 nd snooping mac-binding
• Chapter 24 Commands for DHCP
  • 24.1 Commands for DHCP Server Configuration
    • 24.1.1 bootfile
    • 24.1.2 clear ip dhcp binding
    • 24.1.3 clear ip dhcp conflict
    • 24.1.4 clear ip dhcp server statistics
    • 24.1.5 client-identifier
    • 24.1.6 client-name
    • 24.1.7 debug ip dhcp server
    • 24.1.8 default-router
    • 24.1.9 dns-server
    • 24.1.10 domain-name
    • 24.1.11 hardware-address
    • 24.1.12 host
    • 24.1.13 ip dhcp conflict logging
    • 24.1.14 ip dhcp excluded-address
    • 24.1.15 ip dhcp pool
    • 24.1.16 ip dhcp conflict ping-detection enable
    • 24.1.17 ip dhcp ping packets
    • 24.1.18 ip dhcp ping timeout
    • 24.1.19 lease
    • 24.1.20 netbios-name-server
    • 24.1.21 netbios-node-type
    • 24.1.22 network-address
    • 24.1.23 next-server
    • 24.1.24 option
    • 24.1.25 service dhcp
    • 24.1.26 show ip dhcp binding
    • 24.1.27 show ip dhcp conflict
    • 24.1.28 show ip dhcp server statistics
  • 24.2 Commands for DHCP Relay Configuration
    • 24.2.1 ip forward-protocol udp bootps
    • 24.2.2 ip helper-address
• Chapter 25 Commands for DHCPv6
  • 25.1 clear ipv6 dhcp binding
  • 25.2 clear ipv6 dhcp server statistics
  • 25.3 debug ipv6 dhcp client packet
  • 25.4 debug ipv6 dhcp detail
  • 25.5 debug ipv6 dhcp relay packet
  • 25.6 debug ipv6 dhcp server
  • 25.7 dns-server
  • 25.8 domain-name
  • 25.9 excluded-address
  • 25.10 ipv6 address
  • 25.11 ipv6 dhcp client pd
  • 25.12 ipv6 dhcp client pd hint
  • 25.13 ipv6 dhcp pool
  • 25.14 ipv6 dhcp relay destination
  • 25.15 ipv6 dhcp server
  • 25.16 ipv6 general-prefix
  • 25.17 ipv6 local pool
  • 25.18 lifetime
  • 25.19 network-address
  • 25.20 prefix-delegation
  • 25.21 prefix-delegation pool
  • 25.22 service dhcpv6
  • 25.23 show ipv6 dhcp
  • 25.24 show ipv6 dhcp binding
  • 25.25 show ipv6 dhcp interface
  • 25.26 show ipv6 dhcp local pool
  • 25.27 show ipv6 dhcp pool
  • 25.28 show ipv6 dhcp statistics
  • 25.29 show ipv6 general-prefix
• Chapter 26 Commands for DHCP Option 82
  • 26.1 ip dhcp relay information option
  • 26.2 ip dhcp relay information policy
  • 26.3 ip dhcp relay information option subscriber-id
  • 26.4 ip dhcp server relay information enable
  • 26.5 show ip dhcp relay information option
  • 26.6 debug ip dhcp relay packet
• Chapter 27 Commands for DHCP Snooping
  • 27.1 debug ip dhcp snooping packet interface
  • 27.2 debug ip dhcp snooping packet
  • 27.3 debug ip dhcp snooping update
  • 27.4 debug ip dhcp snooping event
  • 27.5 debug ip dhcp snooping binding
  • 27.6 ip dhcp snooping
  • 27.7 ip dhcp snooping binding
  • 27.8 ip dhcp snooping binding user
  • 27.9 ip dhcp snooping binding arp
  • 27.10 ip dhcp snooping binding dot1x
  • 27.11 ip dhcp snooping binding user-control
  • 27.12 ip dhcp snooping binding user-control max-user
  • 27.13 ip dhcp snooping trust
  • 27.14 ip dhcp snooping action
  • 27.15 ip dhcp snooping action MaxNum
  • 27.16 ip dhcp snooping limit-rate
  • 27.17 ip dhcp snooping information enable
  • 27.18 ip dhcp snooping option82 enable
  • 27.19 enable trustview key
  • 27.20 ip user helper-address
  • 27.21 show trustview status
  • 27.22 show ip dhcp snooping
• Chapter 28 Commands for DHCPv6 Snooping
  • 28.1 clear ipv6 dhcp snooping binding
  • 28.2 debug ipv6 dhcp snooping binding
  • 28.3 debug ipv6 dhcp snooping event
  • 28.4 debug ipv6 dhcp snooping packet
  • 28.5 ipv6 dhcp snooping action
  • 28.6 ipv6 dhcp snooping action MaxNum
  • 28.7 ipv6 dhcp snooping binding enable
  • 28.8 ipv6 dhcp snooping binding nd
  • 28.9 ipv6 dhcp snooping binding user
  • 28.10 ipv6 dhcp snooping binding user-control
  • 28.11 ipv6 dhcp snooping binding-limit
  • 28.12 ipv6 dhcp snooping enable
  • 28.13 ip dhcp snooping trust
  • 28.14 show ipv6 dhcp snooping
  • 28.15 show ipv6 dhcp snooping binding
  • 28.16 show ipv6 dhcp snooping interface
• Chapter 29 Commands for Routing Policy
  • 29.1 ip prefix-list description
  • 29.2 ip prefix-list seq
  • 29.3 ip prefix-list sequence-number
  • 29.4 match as-path
  • 29.5 match community
  • 29.6 match interface
  • 29.7 match ip
  • 29.8 match ipv6 address
  • 29.9 match ipv6 next-hop
  • 29.10 match metric
  • 29.11 match origin
  • 29.12 match route-type
  • 29.13 match tag
  • 29.14 route-map
  • 29.15 set aggregator
  • 29.16 set as-path
  • 29.17 set atomic-aggregate
  • 29.18 set comm-list
  • 29.19 set community
  • 29.20 set extcommunity
  • 29.21 set ip next-hop
  • 29.22 set local-preference
  • 29.23 set metric
  • 29.24 set metric-type
  • 29.25 set origin
  • 29.26 set originator-id
  • 29.27 set tag
  • 29.28 set vpnv4 next-hop
  • 29.29 set weight
  • 29.30 show ip prefix-list <list-name>
  • 29.31 show ip prefix-list<detail|summary>
  • 29.32 show route-map
  • 29.33 show router-id
• Chapter 30 Commands for Static Route
  • 30.1 ip route
  • 30.2 show ip route
  • 30.3 show ip route vrf
  • 30.4 ip route vrf
• Chapter 31 Commands for RIP
  • 31.1 accept-lifetime
  • 31.2 address-family ipv4
  • 31.3 clear ip rip route
  • 31.4 debug rip
  • 31.5 debug rip redistribute message send
  • 31.6 debug rip redistribute route receive
  • 31.7 default-information originate
  • 31.8 default-metric
  • 31.9 distance
  • 31.10 distribute-list
  • 31.11 exit-address-family
  • 31.12 ip rip aggregate-address
  • 31.13 ip rip authentication key-chain
  • 31.14 ip rip authentication mode
  • 31.15 ip rip authentication string
  • 31.16 ip rip authentication cisco-compatible
  • 31.17 ip rip receive-packet
  • 31.18 ip rip receive version
  • 31.19 ip rip send-packet
  • 31.20 ip rip send version
  • 31.21 ip rip split-horizon
  • 31.22 key
  • 31.23 key chain
  • 31.24 key-string
  • 31.25 maximum-prefix
  • 31.26 neighbor
  • 31.27 network
  • 31.28 offset-list
  • 31.29 passive-interface
  • 31.30 recv-buffer-size
  • 31.31 redistribute
  • 31.32 route
  • 31.33 router rip
  • 31.34 send-lifetime
  • 31.35 show debugging rip
  • 31.36 show ip protocols rip
  • 31.37 show ip rip
  • 31.38 show ip rip database
  • 31.39 show ip rip interface
  • 31.40 show ip rip aggregate
  • 31.41 timers basic
  • 31.42 version
• Chapter 32 Commands for RIPng
  • 32.1 clear ipv6 route
  • 32.2 default-information originate
  • 32.3 default-metric
  • 32.4 distance
  • 32.5 distribute-list
  • 32.6 debug ipv6 rip
  • 32.7 debug ipv6 rip redistribute message send
  • 32.8 debug ipv6 rip redistribute route receive
  • 32.9 ipv6 rip aggregate-address
  • 32.10 ipv6 rip split-horizon
  • 32.11 ipv6 router rip
  • 32.12 neighbor
  • 32.13 offset-list
  • 32.14 passive-interface
  • 32.15 redistribute
  • 32.16 redistribute ospf
  • 32.17 route
  • 32.18 router ipv6 rip
  • 32.19 show debugging ipv6 rip
  • 32.20 show ipv6 rip interface
  • 32.21 show ipv6 rip redistribute
  • 32.22 show ipv6 protocols rip
  • 32.23 show ipv6 rip
  • 32.24 show ipv6 rip database
  • 32.25 show ipv6 rip aggregate
  • 32.26 show ipv6 rip redistribute
  • 32.27 timers basic
• Chapter 33 Commands for OSPF
  • 33.1 area authentication
  • 33.2 area default-cost
  • 33.3 area filter-list
  • 33.4 area nssa
  • 33.5 area range
  • 33.6 area stub
  • 33.7 area virtual-link
  • 33.8 auto-cost reference-bandwidth
  • 33.9 compatible rfc1583
  • 33.10 clear ip ospf process
  • 33.11 debug ospf events
  • 33.12 debug ospf ifsm
  • 33.13 debug ospf lsa
  • 33.14 debug ospf nfsm
  • 33.15 debug ospf nsm
  • 33.16 debug ospf packet
  • 33.17 debug ospf route
  • 33.18 debug ospf redistribute message send
  • 33.19 debug ospf redistribute route receive
  • 33.20 default-information originate
  • 33.21 default-metric
  • 33.22 distance
  • 33.23 distribute-list
  • 33.24 host area
  • 33.25 ip ospf authentication
  • 33.26 ip ospf authentication-key
  • 33.27 ip ospf cost
  • 33.28 ip ospf database-filter
  • 33.29 ip ospf dead-interval
  • 33.30 ip ospf disable all
  • 33.31 ip ospf hello-interval
  • 33.32 ip ospf message-digest-key
  • 33.33 ip ospf mtu
  • 33.34 ip ospf mtu-ignore
  • 33.36 ip ospf priority
  • 33.37 ip ospf retransmit-interval
  • 33.38 ip ospf transmit-delay
  • 33.39 key
  • 33.40 key chain
  • 33.41 log-adjacency-changes detail
  • 33.42 max-concurrent-dd
  • 33.43 neighbor
  • 33.44 network area
  • 33.45 ospf abr-type
  • 33.46 ospf router-id
  • 33.47 overflow database
  • 33.48 overflow database external
  • 33.49 passive-interface
  • 33.50 redistribute
  • 33.51 redistribute ospf
  • 33.52 router ospf
  • 33.53 show ip ospf
  • 33.54 show ip ospf border-routers
  • 33.55 show ip ospf database
  • 33.56 show ip ospf interface
  • 33.57 show ip ospf neighbor
  • 33.58 show ip ospf redistribute
  • 33.59 show ip ospf route
  • 33.60 show ip ospf virtual-links
  • 33.61 show ip route process-detail
  • 33.62 show ip protocols
  • 33.63 summary-address
  • 33.64 timers spf
• Chapter 34 Commands for OSPFv3
  • 34.1 area default cost
  • 34.2 area range
  • 34.3 area stub
  • 34.4 area virtual-link
  • 34.5 abr-type
  • 34.6 default-metric
  • 34.7 debug ipv6 ospf events
  • 34.8 debug ipv6 ospf ifsm
  • 34.9 debug ipv6 ospf lsa
  • 34.10 debug ipv6 ospf nfsm
  • 34.11 debug ipv6 ospf nsm
  • 34.12 debug ipv6 ospf packet
  • 34.13 debug ipv6 ospf redistribute message send
  • 34.14 debug ipv6 ospf redistribute route receive
  • 34.15 debug ipv6 ospf route
  • 34.16 ipv6 ospf cost
  • 34.17 ipv6 ospf dead-interval
  • 34.18 ipv6 ospf display route single-line
  • 34.19 ipv6 ospf hello-interval
  • 34.21 ipv6 ospf retransmit-interval
  • 34.22 ipv6 ospf transmit-delay
  • 34.23 ipv6 router ospf
  • 34.24 max-concurrent-dd
  • 34.25 passive-interface
  • 34.26 redistribute
  • 34.27 redistribute ospf
  • 34.28 router-id
  • 34.29 router ipv6 ospf
  • 34.30 show ipv6 ospf
  • 34.31 show ipv6 ospf database
  • 34.32 show ipv6 ospf interface
  • 34.33 show ipv6 ospf neighbor
  • 34.34 show ipv6 ospf route
  • 34.35 show ipv6 ospf redistribute
  • 34.36 show ipv6 ospf topology
  • 34.37 show ipv6 ospf virtual-links
  • 34.38 show ipv6 route process-detail
  • 34.39 timers spf
• Chapter 35 Commands for BGP and MBGP4+
  • 35.1 address-family
  • 35.2 address-family ipv4
  • 35.3 address-family vpnv4
  • 35.4 aggregate-address
  • 35.5 bgp aggregate-nexthop-check
  • 35.6 bgp always-compare-med
  • 35.7 bgp bestpath as-path ignore
  • 35.8 bgp bestpath compare-confed-aspath
  • 35.9 bgp bestpath compare-routerid
  • 35.10 bgp bestpath med
  • 35.11 bgp client-to-client reflection
  • 35.12 bgp cluster-id
  • 35.13 bgp confederation identifier
  • 35.14 bgp confederation peers
  • 35.15 bgp dampening
  • 35.16 bgp default
  • 35.17 bgp deterministic-med
  • 35.18 bgp enforce-first-as
  • 35.20 bgp inbound-route-filter
  • 35.21 bgp inbound-max-route-num
  • 35.22 bgp log-neighbor-changes
  • 35.23 bgp network import-check
  • 35.25 bgp rfc1771-strict
  • 35.26 bgp router-id
  • 35.27 bgp scan-time
  • 35.28 clear ip bgp
  • 35.29 clear ip bgp dampening
  • 35.30 clear ip bgp flap-statistics
  • 35.31 debug bgp
  • 35.32 debug bgp redistribute message send
  • 35.33 debug bgp redistribute route receive
  • 35.34 debug ipv6 bgp redistribute message send
  • 35.35 debug ipv6 bgp redistribute route receive
  • 35.36 distance
  • 35.37 distance bgp
  • 35.38 exit-address-family
  • 35.39 import map
  • 35.40 ip as-path access-list
  • 35.41 ip community-list
  • 35.42 ip extcommunity-list
  • 35.43 neighbor activate
  • 35.44 neighbor advertisement-interval
  • 35.45 neighbor allowas-in
  • 35.46 neighbor attribute-unchanged
  • 35.47 neighbor capability
  • 35.48 neighbor capability orf prefix-list
  • 35.49 neighbor collide-established
  • 35.50 neighbor default-originate
  • 35.51 neighbor description
  • 35.52 neighbor distribute-list
  • 35.53 neighbor dont-capability-negotiate
  • 35.54 neighbor ebgp-multihop
  • 35.55 neighbor enforce-multihop
  • 35.56 neighbor filter-list
  • 35.57 neighbor interface
  • 35.58 neighbor maximum-prefix
  • 35.59 neighbor next-hop-self
  • 35.60 neighbor override-capability
  • 35.61 neighbor passive
  • 35.62 neighbor peer-group (Creating)
  • 35.63 neighbor peer-group (Configuring group members)
  • 35.64 neighbor port
  • 35.65 neighbor prefix-list
  • 35.66 neighbor remote-as
  • 35.67 neighbor remove-private-AS
  • 35.69 neighbor route-reflector-client
  • 35.70 neighbor route-server-client
  • 35.71 neighbor send-community
  • 35.72 neighbor shutdown
  • 35.73 neighbor soft-reconfiguration inbound
  • 35.74 neighbor soo
  • 35.75 neighbor strict-capability-match
  • 35.76 neighbor timers
  • 35.77 neighbor timers connect
  • 35.78 neighbor unsuppress-map
  • 35.79 neighbor update-source
  • 35.80 neighbor version 4
  • 35.81 neighbor weight
  • 35.82 network (BGP)
  • 35.83 redistribute (BGP)
  • 35.84 redistribute ospf
  • 35.85 redistribute ospf (MBGP4+)
  • 35.86 rd
  • 35.87 router bgp
  • 35.88 route-target
  • 35.89 set vpnv4 next-hop
  • 35.90 show ip bgp
  • 35.91 show ip bgp attribute-info
  • 35.92 show ip bgp community
  • 35.93 show ip bgp community-info
  • 35.94 show ip bgp community-list
  • 35.95 show ip bgp dampening
  • 35.96 show ip bgp filter-list
  • 35.97 show ip bgp inconsistent-as
  • 35.98 show ip bgp neighbors
  • 35.99 show ip bgp paths
  • 35.101 show ip bgp quote-regexp
  • 35.102 show ip bgp regexp
  • 35.103 show ip bgp route-map
  • 35.104 show ip bgp scan
  • 35.105 show ip bgp summary
  • 35.106 show ip bgp view
  • 35.107 show ip bgp view neighbors
  • 35.108 show ip bgp vpnv4
  • 35.109 show ipv6 bgp redistribute
  • 35.110 timers bgp
• Chapter 36 Commands for Black Hole Routing
  • 36.1 ip route null0
  • 36.2 ipv6 route null0
• Chapter 37 Commands for ECMP
  • 37.1 maximum-paths
• Chapter 38 IPv4 Multicast Protocol
  • 38.1 Public Commands for Multicast
    • 38.1.1 show ip mroute
  • 38.2 Commands for PIM-DM
    • 38.2.1 debug pim timer sat
    • 38.2.2 debug pim timer srt
    • 38.2.3 ip mroute
    • 38.2.4 ip pim bsr-border
    • 38.2.5 ip pim dense-mode
    • 38.2.6 ip pim dr-priority
    • 38.2.7 ip pim exclude-genid
    • 38.2.8 ip pim hello-holdtime
    • 38.2.10 ip pim multicast-routing
    • 38.2.11 ip pim neighbor-filter
    • 38.2.12 ip pim scope-border
    • 38.2.13 ip pim state-refresh origination-interval
    • 38.2.14 show ip pim interface
    • 38.2.15 show ip pim mroute dense-mode
    • 38.2.16 show ip pim neighbor
    • 38.2.17 show ip pim nexthop
  • 38.3 Commands for PIM-SM
    • 38.3.1 clear ip pim bsr rp-set
    • 38.3.2 debug pim event
    • 38.3.3 debug pim mfc
    • 38.3.4 debug pim mib
    • 38.3.5 debug pim nexthop
    • 38.3.6 debug pim nsm
    • 38.3.7 debug pim packet
    • 38.3.8 debug pim state
    • 38.3.9 debug pim timer
    • 38.3.10 ip mroute
    • 38.3.11 ip pim accept-register
    • 38.3.12 ip pim bsr-border
    • 38.3.13 ip pim bsr-candidate
    • 38.3.14 ip pim cisco-register-checksum
    • 38.3.15 ip pim dr-priority
    • 38.3.16 ip pim exclude-genid
    • 38.3.17 ip pim hello-holdtime
    • 38.3.18 ip pim hello-interval
    • 38.3.19 ip pim ignore-rp-set-priority
    • 38.3.20 ip pim jp-timer
    • 38.3.21 ip pim multicast-routing
    • 38.3.22 ip pim neighbor-filter
    • 38.3.23 ip pim register-rate-limit
    • 38.3.24 ip pim register-rp-reachability
    • 38.3.25 ip pim register-source
    • 38.3.26 ip pim register-suppression
    • 38.3.27 ip pim rp-address
    • 38.3.28 ip pim rp-candidate
    • 38.3.29 ip pim rp-register-kat
    • 38.3.30 ip pim scope-border
    • 38.3.31 ip pim sparse-mode
    • 38.3.32 show ip pim bsr-router
    • 38.3.33 show ip pim interface
    • 38.3.34 show ip pim mroute sparse-mode
    • 38.3.35 show ip pim neighbor
    • 38.3.36 show ip pim nexthop
    • 38.3.37 show ip pim rp-hash
    • 38.3.38 show ip pim rp mapping
  • 38.4 Commands for MSDP Configuration
    • 38.4.1 cache-sa-holdtime
    • 38.4.2 cache-sa-maximum
    • 38.4.3 cache-sa-state
    • 38.4.4 clear msdp peer
    • 38.4.5 clear msdp sa-cache
    • 38.4.6 clear msdp statistics
    • 38.4.7 connect-source
    • 38.4.8 debug msdp all
    • 38.4.9 debug msdp events
    • 38.4.10 debug msdp filter
    • 38.4.11 debug msdp fsm
    • 38.4.12 debug msdp keepalive
    • 38.4.13 debug msdp nsm
    • 38.4.14 debug msdp packet
    • 38.4.15 debug msdp peer
    • 38.4.16 debug msdp timer
    • 38.4.17 default-rpf-peer
    • 38.4.18 description
    • 38.4.19 exit-peer-mode
    • 38.4.20 mesh-group
    • 38.4.21 originating-rp
    • 38.4.22 peer
    • 38.4.23 redistribute
    • 38.4.24 remote-as
    • 38.4.26 sa-filter
    • 38.4.28 sa-request-filter
    • 38.4.29 show msdp global
    • show msdp local-sa-cache
    • 38.4.31 show msdp peer
    • 38.4.32 show msdp sa-cache
    • 38.4.33 show msdp sa-cache summary
    • 38.4.34 show msdp statistics
    • 38.4.35 show msdp summary
    • shutdown
    • 38.4.37 ttl-threshold
  • 38.5 Commands for ANYCAST RP v4
    • 38.5.1 debug pim anycast-rp
    • 38.5.3 ip pim anycast-rp
    • 38.5.4 ip pim anycast-rp self-rp-address
    • 38.5.5 ip pim rp-candidate
    • 38.5.6 show debugging pim
    • 38.5.7 show ip pim anycast-rp first-hop
    • 38.5.8 show ip pim anycast-rp non-first-hop
    • 38.5.9 show ip pim anycast-rp status
  • 38.6 Commands for PIM-SSM
    • 38.6.1 ip multicast ssm
  • 38.7 Commands for DVMRP
    • 38.7.1 debug dvmrp
    • 38.7.2 ip dvmrp enable
    • 38.7.3 ip dvmrp metric
    • 38.7.4 ip dvmrp multicast-routing
    • 38.7.5 ip dvmrp output-report-delay
    • 38.7.6 ip dvmrp reject-non-pruners
    • 38.7.7 ip dvmrp tunnel
    • 38.7.8 show ip dvmrp
    • 38.7.9 show ip dvmrp interface
    • 38.7.10 show ip dvmrp neighbor
    • 38.7.11 show ip dvmrp prune
    • 38.7.12 show ip dvmrp route
  • 38.8 Commands for DCSCM
    • 38.8.1 access-list (Multicast Destination Control)
    • 38.8.2 access-list (Multicast Source Control)
    • 38.8.3 ip multicast destination-control access-group
    • 38.8.4 ip multicast destination-control access-group (sip)
    • 38.8.5 ip multicast destination-control access-group (vmac)
    • 38.8.6 ip multicast policy
    • 38.8.7 ip multicast source-control
    • 38.8.8 ip multicast source-control access-group
    • 38.8.9 multicast destination-control
    • 38.8.10 show ip multicast destination-control
    • 38.8.11 show ip multicast destination-control access-list
    • 38.8.12 show ip multicast policy
    • 38.8.13 show ip multicast source-control
    • 38.8.14 show ip multicast source-control access-list
  • 38.9 Commands for IGMP
    • 38.9.1 clear ip igmp group
    • 38.9.2 debug igmp event
    • 38.9.4 ip igmp access-group
    • 38.9.5 ip igmp immediate-leave
    • 38.9.6 ip igmp join-group
    • 38.9.7 ip igmp last-member-query-interval
    • 38.9.8 ip igmp limit
    • 38.9.9 ip igmp query-interval
    • 38.9.10 ip igmp query-max-response-time
    • 38.9.11 ip igmp query-timeout
    • 38.9.12 ip igmp robust-variable
    • 38.9.13 ip igmp static-group
    • 38.9.15 show ip igmp groups
    • 38.9.16 show ip igmp interface
  • 38.10 Commands for IGMP Snooping
    • 38.10.1 clear ip igmp snooping vlan
    • 38.10.2 clear ip igmp snooping vlan <1-4094> mrouter-port
    • 38.10.3 debug igmp snooping all/packet/event/timer/mfc
    • 38.10.4 ip igmp snooping
    • 38.10.5 ip igmp snooping vlan
    • 38.10.6 ip igmp snooping vlan immediate-leave
    • 38.10.7 ip igmp snooping vlan l2-general-querier
    • 38.10.8 ip igmp snooping vlan l2-general-querier-source
    • 38.10.9 ip igmp snooping vlan l2-general-querier-version
    • 38.10.10 ip igmp snooping vlan limit
    • 38.10.11 ip igmp snooping vlan mrouter-port interface
    • 38.10.12 ip igmp snooping vlan mrpt
    • 38.10.13 ip igmp snooping vlan query-interval
    • 38.10.14 ip igmp snooping vlan query-mrsp
    • 38.10.15 ip igmp snooping vlan query-robustness
    • 38.10.16 ip igmp snooping vlan report source-address
    • 38.10.17 ip igmp snooping vlan static-group
    • 38.10.18 ip igmp snooping vlan suppression-query-time
    • 38.10.19 show ip igmp snooping
  • 38.11 Commands for IGMP Proxy
    • 38.11.1 clear ip igmp proxy group
    • 38.11.2 debug igmp proxy all
    • 38.11.3 debug igmp proxy event
    • 38.11.4 debug igmp proxy mfc
    • 38.11.5 debug igmp proxy packet
    • 38.11.6 debug igmp proxy timer
    • 38.11.7 ip igmp proxy
    • 38.11.8 ip igmp proxy aggregate
    • 38.11.9 ip igmp proxy downstream
    • 38.11.10 ip igmp proxy limit
    • 38.11.11 ip igmp proxy multicast-source
    • 38.11.12 ip igmp proxy unsolicited-report interval
    • 38.11.13 ip igmp proxy unsolicited-report robustness
    • 38.11.14 ip igmp proxy upstream
    • 38.11.15 ip multicast ssm
    • 38.11.16 ip pim bsr-border
    • 38.11.17 show debugging igmp proxy
    • 38.11.18 show ip igmp proxy
    • 38.11.19 show ip igmp proxy mroute
    • 38.11.20 show ip igmp proxy upstream groups
• Chapter 39 IPv6 Multicast Protocol
  • 39.1 Public Commands for Multicast
    • 39.1.1 show ipv6 mroute
  • 39.2 Commands for PIM-DM6
    • 39.2.1 debug ipv6 pim timer sat
    • 39.2.2 debug ipv6 pim timer srt
    • 39.2.3 ipv6 mroute
    • 39.2.4 ipv6 pim bsr-border
    • 39.2.5 ipv6 pim dense-mode
    • 39.2.6 ipv6 pim dr-priority
    • 39.2.7 ipv6 pim exclude-genid
    • 39.2.8 ipv6 pim hello-holdtime
    • 39.2.9 ipv6 pim hello-interval
    • 39.2.10 ipv6 pim multicast-routing
    • 39.2.11 ipv6 pim neighbor-filter
    • 39.2.12 ipv6 pim scope-border
    • 39.2.13 ipv6 pim state-refresh origination-interval
    • 39.2.14 show ipv6 pim interface
    • 39.2.15 show ipv6 pim mroute dense-mode
    • 39.2.16 show ipv6 pim neighbor
    • 39.2.17 show ipv6 pim nexthop
  • 39.3 Commands for PIM-SM6
    • 39.3.1 clear ipv6 pim bsr rp-set
    • 39.3.2 debug ipv6 pim events
    • 39.3.3 debug ipv6 pim mfc
    • 39.3.4 debug ipv6 pim mib
    • 39.3.5 debug ipv6 pim nexthop
    • 39.3.6 debug ipv6 pim nsm
    • 39.3.7 debug ipv6 pim packet
    • 39.3.8 debug ipv6 pim state
    • 39.3.9 debug ipv6 pim timer
    • 39.3.10 ipv6 mroute
    • 39.3.11 ipv6 pim accept-register
    • 39.3.12 ipv6 pim bsr-border
    • 39.3.13 ipv6 pim bsr-candidate
    • 39.3.14 ipv6 pim cisco-register-checksum
    • 39.3.15 ipv6 pim dr-priority
    • 39.3.16 ipv6 pim exclude-genid
    • 39.3.17 ipv6 pim hello-holdtime
    • 39.3.18 ipv6 pim hello-interval
    • 39.3.19 ipv6 pim ignore-rp-set-priority
    • 39.3.20 ipv6 pim jp-timer
    • 39.3.21 Command: ipv6 pim multicast-routing
    • 39.3.22 ipv6 pim neighbor-filter
    • 39.3.23 ipv6 pim register-rate-limit
    • 39.3.24 ipv6 pim register-rp-reachability
    • 39.3.25 ipv6 pim register-source
    • 39.3.26 ipv6 pim register-suppression
    • 39.3.27 ipv6 pim rp-address
    • 39.3.28 ipv6 pim rp-candidate
    • 39.3.29 ipv6 pim rp-register-kat
    • 39.3.30 ipv6 pim scope-border
    • 39.3.31 ipv6 pim sparse-mode
    • 39.3.33 show ipv6 pim interface
    • 39.3.34 show ipv6 pim mroute sparse-mode
    • 39.3.35 show ipv6 pim neighbor
    • 39.3.36 show ipv6 pim nexthop
    • 39.3.37 show ipv6 pim rp-hash
    • 39.3.38 show ipv6 pim rp mapping
  • 39.4 Commands for ANYCAST RP v6
    • 39.4.1 debug ipv6 pim anycast-rp
    • 39.4.2 ipv6 pim anycast-rp
    • 39.4.3 ipv6 pim anycast-rp
    • 39.4.4 ipv6 pim anycast-rp self-rp-address
    • 39.4.5 ipv6 pim rp-candidate
    • 39.4.6 show debugging ipv6 pim
    • 39.4.7 show ipv6 pim anycast-rp first-hop
    • 39.4.8 show ipv6 pim anycast-rp non-first-hop
    • 39.4.9 show ipv6 pim anycast-rp status
  • 39.5 Commands for PIM-SSM6
    • 39.5.1 ipv6 pim ssm
  • 39.6 Commands for IPv6 DCSCM
    • 39.6.1 ipv6 access-list(ipv6 multicast source control)
    • 39.6.2 ipv6 access-list(multicast destination control)
    • 39.6.3 ipv6 multicast destination-control access-group
    • 39.6.4 ipv6 multicast destination-control access-group (sip)
    • 39.6.5 ipv6 multicast destination-control access-group (vmac)
    • 39.6.6 ipv6 multicast policy
    • 39.6.7 ipv6 multicast source-control
    • 39.6.8 ipv6 multicast source-control access-group
    • 39.6.9 multicast destination-control
    • 39.6.10 show ipv6 multicast destination-control
    • 39.6.11 show ipv6 multicast destination-control access-list
    • 39.6.12 show ipv6 multicast policy
    • 39.6.13 show ipv6 multicast source-control
    • 39.6.14 show ipv6 multicast source-control access-list
  • 39.7 Commands for MLD
    • 39.7.1 clear ipv6 mld group
    • 39.7.2 debug ipv6 mld events
    • 39.7.4 ipv6 mld access-group
    • 39.7.5 ipv6 mld immediate-leave
    • 39.7.6 ipv6 mld join-group
    • 39.7.7 ipv6 mld join-group mode source
    • 39.7.8 ipv6 mld last-member-query-interval
    • 39.7.9 ipv6 mld limit
    • 39.7.10 ipv6 mld query-interval
    • 39.7.11 ipv6 mld query-max-response-time
    • 39.7.12 ipv6 mld query-timeout
    • 39.7.14 ipv6 mld version
    • 39.7.15 show ipv6 mld groups
    • 39.7.16 show ipv6 mld interface
    • 39.7.17 show ipv6 mld join-group
  • 39.8 Commands for MLD Snooping Configuration
    • 39.8.1 clear ipv6 mld snooping vlan
    • 39.8.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
    • 39.8.3 debug mld snooping all/packet/event/timer/mfc
    • 39.8.4 ipv6 mld snooping
    • 39.8.5 ipv6 mld snooping vlan
    • 39.8.6 ipv6 mld snooping vlan immediate-leave
    • 39.8.7 ipv6 mld snooping vlan l2-general-querier
    • 39.8.8 ipv6 mld snooping vlan limit
    • 39.8.9 ipv6 mld snooping vlan mrouter-port interface
    • 39.8.10 ipv6 mld snooping vlan mrpt
    • 39.8.11 ipv6 mld snooping vlan query-interval
    • 39.8.12 ipv6 mld snooping vlan query-mrsp
    • 39.8.13 ipv6 mld snooping vlan query-robustness
    • 39.8.14 ipv6 mld snooping vlan static-group
    • 39.8.15 ipv6 mld snooping vlan suppression-query-time
    • 39.8.16 show ipv6 mld snooping
• Chapter 40 Commands for Multicast VLAN
  • 40.1 multicast-vlan
  • 40.2 multicast-vlan association
• Chapter 41 Commands for ACL
  • 41.1 absolute-periodic/periodic
  • 41.2 absolute start
  • 41.3 access-list (ip extended)
  • 41.4 access-list (ip standard)
  • 41.5 access-list(mac extended)
  • 41.6 access-list(mac-ip extended)
  • 41.7 access-list(mac standard)
  • 41.8 clear access-group statistic interface
  • 41.9 firewall
  • 41.10 firewall default
  • 41.11 ip access extended
  • 41.12 ip access standard
  • 41.13 ipv6 access-list
  • 41.14 ipv6 access standard
  • 41.15 ipv6 access extended
  • 41.16 {ip|ipv6|mac|mac-ip} access-group
  • 41.17 mac access extended
  • 41.18 mac-ip access extended
  • 41.19 permit | deny (ip extended)
  • 41.20 permit | deny(ip standard)
  • 41.21 permit | deny(ipv6 extended)
  • 41.22 permit | deny(ipv6 standard)
  • 41.23 permit | deny(mac extended)
  • 41.24 permit | deny(mac-ip extended)
  • 41.25 show access-lists
  • 41.26 show access-group
  • 41.27 show firewall
  • 41.28 show ipv6 access-lists
  • 41.29 show time-range
  • 41.30 time-range
• Chapter 42 Commands for 802.1x
  • 42.1 debug dot1x detail
  • 42.2 debug dot1x error
  • 42.3 debug dot1x fsm
  • 42.4 debug dot1x packet
  • 42.6 dot1x eapor enable
  • 42.7 dot1x enable
  • 42.8 dot1x ipv6 passthrough
  • 42.9 dot1x guest-vlan
  • 42.10 dot1x macfilter enable
  • 42.11 dot1x max-req
  • 42.12 dot1x user free-resource
  • 42.13 dot1x max-user macbased
  • 42.14 dot1x max-user userbased
  • 42.16 dot1x port-method
  • 42.17 dot1x privateclient enable
  • 42.18 dot1x re-authenticate
  • 42.19 dot1x re-authentication
  • 42.20 dot1x timeout quiet-period
  • 42.21 dot1x timeout re-authperiod
  • 42.22 dot1x timeout tx-period
  • 42.23 dot1x unicast enable
  • 42.24 dot1x web authentication enable
  • 42.25 dot1x web redirect
  • 42.26 dot1x web redirect enable
  • 42.27 show dot1x
• Chapter 43 Commands for the Number Limitation Function of Port, MAC in VLAN and IP
  • 43.1 switchport mac-address dynamic maximum
  • 43.2 vlan mac-address dynamic maximum
  • 43.3 switchport arp dynamic maximum
  • 43.4 switchport nd dynamic maximum
  • 43.5 ip arp dynamic maximum
  • 43.6 ipv6 nd dynamic maximum
  • 43.7 mac-address query timeout
  • 43.8 show mac-address dynamic count
  • 43.9 show arp-dynamic count
  • 43.10 show nd-dynamic count
  • 43.11 debug switchport mac count
  • 43.12 debug switchport arp count
  • 43.13 debug switchport nd count
  • 43.14 debug vlan mac count
  • 43.15 debug ip arp count
  • 43.16 debug ipv6 nd count
• Chapter 44 Commands for AM Configuration
  • 44.1 am enable
  • 44.2 am port
  • 44.3 am ip-pool
  • 44.4 am mac-ip-pool
  • 44.5 no am all
  • 44.6 show am
• Chapter 45 Commands for Security Feature
  • 45.1 dosattack-check srcip-equal-dstip enable
  • 45.2 dosattack-check ipv4-first-fragment enable
  • 45.3 dosattack-check tcp-flags enable
  • 45.4 dosattack-check srcport-equal-dstport enable
  • 45.5 dosattack-check tcp-fragment enable
  • 45.6 dosattack-check tcp-segment
  • 45.7 dosattack-check icmp-attacking enable
  • 45.8 dosattack-check icmpv4-size
  • 45.9 dosattack-check icmpv6-size
• Chapter 46 Commands for TACACS+
  • 46.1 tacacs-server authentication host
  • 46.2 tacacs-server key
  • 46.3 tacacs-server nas-ipv4
  • 46.4 tacacs-server timeout
  • 46.5 debug tacacs-server
• Chapter 47 Commands for RADIUS
  • 47.1 aaa enable
  • 47.2 aaa-accounting enable
  • 47.3 aaa-accounting update
  • 47.4 debug aaa packet
  • 47.5 debug aaa detail attribute
  • 47.6 debug aaa detail connection
  • 47.7 debug aaa detail event
  • 47.8 debug aaa error
  • 47.9 radius nas-ipv4
  • 47.10 radius nas-ipv6
  • 47.11 radius-server accounting host
  • 47.12 radius-server authentication host
  • 47.13 radius-server dead-time
  • 47.14 radius-server key
  • 47.15 radius-server retransmit
  • 47.16 radius-server timeout
  • 47.17 radius-server accounting-interim-update timeout
  • 47.18 show aaa authenticated-user
  • 47.19 show aaa authenticating-user
  • 47.20 show aaa config
  • 47.21 show radius count
• Chapter 48 Commands for SSL Configuration
  • 48.1 ip http secure-server
  • 48.2 ip http secure-port
  • 48.3 ip http secure- ciphersuite
  • 48.4 show ip http secure-server status
  • 48.5 debug ssl
• Chapter 49 Commands for IPv6 Security RA
  • 49.1 ipv6 security-ra enable
  • 49.2 ipv6 security-ra enable
  • 49.3 show ipv6 security-ra
  • 49.4 debug ipv6 security-ra
• Chapter 50 Commands for VLAN-ACL
  • 50.1 clear vacl statistic vlan
  • 50.2 show vacl vlan
  • 50.3 vacl ip access-group
  • 50.4 vacl ipv6 access-group
  • 50.5 vacl mac access-group
  • 50.6 vacl mac-ip access-group
• Chapter 51 Commands for Mirroring Configuration
  • 51.1 monitor session source interface
  • 51.2 monitor session source interface access-list
  • 51.3 monitor session destination interface
  • 51.4 show monitor
• Chapter 52 Commands for RSPAN Configuration
  • 52.1 remote-span
  • 52.2 monitor session remote vlan
  • 52.3 monitor session reflector-port
• Chapter 53 Commands for sFlow
  • 53.1 sflow destination
  • 53.2 sflow agent-address
  • 53.3 sflow priority
  • 53.4 sflow header-len
  • 53.5 sflow data-len
  • 53.6 sflow counter-interval
  • 53.7 sflow rate
  • 53.8 show sflow
• Chapter 54 Commands for VRRP
  • 54.1 advertisement-interval
  • 54.2 circuit-failover
  • 54.3 debug vrrp
  • 54.4 disable
  • 54.5 enable
  • 54.6 interface
  • 54.7 preempt-mode
  • 54.8 priority
  • 54.9 router vrrp
  • 54.10 show vrrp
  • 54.11 virtual-ip
• Chapter 55 Commands for IPv6 VRRPv3 Configuration
  • 55.1 advertisement-interval
  • 55.2 circuit-failover
  • 55.3 debug ipv6 vrrp
  • 55.4 disable
  • 55.5 enable
  • 55.6 preempt-mode
  • 55.7 priority
  • 55.8 router ipv6 vrrp
  • 55.10 virtual-ipv6 interface
• Chapter 56 Commands for MRPP
  • 56.1 control-vlan
  • 56.2 clear mrpp statistics
  • 56.3 debug mrpp
  • 56.4 enable
  • 56.5 fail-timer
  • 56.6 hello-timer
  • 56.7 mrpp enable
  • 56.8 mrpp port-scan-mode
  • 56.9 mrpp ring
  • 56.10 mrpp ring primary-port
  • 56.11 mrpp ring secondary-port
  • 56.12 node-mode
  • 56.13 show mrpp
  • 56.14 show mrpp statistics
• Chapter 57 Commands for ULPP
  • 57.1 clear ulpp flush counter interface
  • 57.2 control vlan
  • 57.3 debug ulpp error
  • 57.4 debug ulpp event
  • 57.5 debug ulpp flush content interface
  • 57.6 debug ulpp flush {send | receive} interface
  • 57.7 description
  • 57.8 flush disable arp
  • 57.9 flush disable mac
  • 57.10 flush enable arp
  • 57.11 flush enable mac
  • 57.12 preemption delay
  • 57.13 preemption mode
  • 57.14 protect vlan-reference-instance
  • 57.15 show ulpp flush counter interface
  • 57.16 show ulpp flush-receive-port
  • 57.17 show ulpp group
  • 57.18 ulpp control vlan
  • 57.19 ulpp flush disable arp
  • 57.20 ulpp flush disable mac
  • 57.21 ulpp flush enable arp
  • 57.22 ulpp flush enable mac
  • 57.23 ulpp group
  • 57.24 ulpp group master
  • 57.25 ulpp group slave
• Chapter 58 Commands for ULSM
  • 58.1 debug ulsm event
  • 58.2 show ulsm group
  • 58.3 ulsm group
  • 58.4 ulsm group {uplink | downlink}
• Chapter 59 Commands for SNTP
  • 59.1 debug sntp
  • 59.2 sntp server
  • 59.3 sntp polltime
  • 59.4 sntp timezone
  • 59.5 show sntp
• Chapter 60 Commands for NTP
  • 60.1 ntp enable
  • 60.2 ntp server
  • 60.3 ntp broadcast server count
  • 60.4 ntp timezone
  • 60.5 ntp access-group
  • 60.6 ntp authenticate
  • 60.7 ntp authentication-key
  • 60.8 ntp trusted-key
  • 60.9 ntp disable
  • 60.10 ntp broadcast client
  • 60.11 ntp multicast client
  • 60.12 ntp ipv6 multicast client
  • 60.13 debug ntp authentication
  • 60.14 debug ntp packet
  • 60.15 debug ntp adjust
  • 60.16 debug ntp sync
  • 60.17 debug ntp events
  • 60.18 show ntp status
  • 60.19 show ntp session
• Chapter 61 Commands for DNSv4/v6
  • 61.1 clear dynamic-host
  • 61.2 debug dns
  • 61.3 dns-server
  • 61.4 dns lookup
  • 61.5 show dns name-server
  • 61.6 show dns domain-list
  • 61.7 show dns hosts
  • 61.8 show dns config
  • 61.9 show dns client
  • 61.10 ip domain-lookup
  • 61.11 ip domain-list
  • 61.12 ip dns server
  • 61.13 ip dns server queue maximum
  • 61.14 ip dns server queue timeout
• Chapter 62 Commands for Show
  • 62.1 clear logging
  • 62.2 logging
  • 62.3 ping
  • 62.4 ping6
  • 62.5 show debugging
  • 62.6 show flash
  • 62.7 show history
  • 62.8 show logging buffered
  • 62.9 show memory
  • 62.10 show running-config
  • 62.11 show startup-config
  • 62.12 show switchport interface
  • 62.13 show tcp
  • 62.14 show telnet login
  • 62.15 show temperature
  • 62.16 show tech-support
  • 62.17 show udp
  • 62.18 show version
  • 62.19 traceroute
  • 62.20 traceroute6
• Chapter 63 Commands for Reload Switch after Specified Time
  • 63.1 reload after
  • 63.2 reload cancel
  • 63.3 show reload
• Chapter 64 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
  • 64.1 cpu-rx-ratelimit total
  • 64.2 cpu-rx-ratelimit queue-length
  • 64.3 cpu-rx-ratelimit protocol
  • 64.4 clear cpu-rx-stat protocol
  • 64.5 cpu-rx-ratelimit channel
  • 64.6 show cpu-rx protocol
  • 64.7 debug driver